Front Quick hitch measurements

[tmacie]

Hi All,
Does anyone have the dimensions for the Quick Hitch system on a LA364? Pin distances, pin diameters, width between the mounts, etc?

Thanks,
Travis

 

[Ben S]

Hi All,
Does anyone have the dimensions for the Quick Hitch system on a LA364? Pin distances, pin diameters, width between the mounts, etc?

Thanks,
Travis

pin distance 175mm, pin diameter 25,4mm hole drilled 26mm
pickup holes 80mm to the front and 20mm up.
i only have one bad picture of my home made one, sorry

 

[tmacie]

Thanks Ben. I'm not quite sure what you mean with the 80mm and 20mm measurements.

How wide is the slot in the bucket where the QH slides in?

Travis

 

[Ben S]

Thanks Ben. I'm not quite sure what you mean with the 80mm and 20mm measurements.

How wide is the slot in the bucket where the QH slides in?

Travis

it is the standard bucket, ill thy to take a few more pictures

 

[tmacie]

I appreciate the help. I don't have a bucket to measure from yet so thats why I'm asking.


Travis

 

[Ben S]

I appreciate the help. I don't have a bucket to measure from yet so thats why I'm asking.


Travis

i used the bucket as a mould to weld the quick attach together, making one wirhout the bucket is very difficult.
took some pictures, hope that helps.

 

[tmacie]

Awesome that helps a bunch. If you have a little more time, here are the measurements I need. I can figure out the rest.



Travis

 

[Ben S]

Awesome that helps a bunch. If you have a little more time, here are the measurements I need. I can figure out the rest.



Travis

on your own risc
inbetween measurements:
810mm
60mm

 

[tmacie]

Thanks Ben!

 

[Ben S]

I appreciate the help. I don't have a bucket to measure from yet so thats why I'm asking.


Travis

why do you want to build one if you dont have a bucket?

 

[tmacie]

I'll be using one of the buckets that fits this loader as my area has a surplus of them as well as attachments that have the same spacing.

Thanks,
Travis