B6100 dire need of advice!

[Travis]

Hi guys,

I'm looking for some advice. I was recently blessed with a trailer full of equipment (attachments) from my uncle that he no longer wants to deal with.

With that said, I currently own a B6100 4X4 with an FEL which isn't a very "heavy" tractor. Now, the equipment in question is as follows:

1) Woods PRD7200 (new)
1) Woods 72" back blade
1) 60" Flail mower
1) Woods 9" Post hole drill
2) TSC 60" Lawn rollers (new)

I guess the question here would be... Is my 6100 able to use any of these?? Also, I did back up to the flail mower and it looks like my lower arms on the 3-point, weren't long enough to hook up properly...

I just have a lot of questions here... Any advice appreciated!! Thanks in advance!! - Travis

 

[Diydave]

Hi guys,

I'm looking for some advice. I was recently blessed with a trailer full of equipment (attachments) from my uncle that he no longer wants to deal with.

With that said, I currently own a B6100 4X4 with an FEL which isn't a very "heavy" tractor. Now, the equipment in question is as follows:

1) Woods PRD7200 (new)
1) Woods 72" back blade
1) 60" Flail mower
1) Woods 9" Post hole drill
2) TSC 60" Lawn rollers (new)

I guess the question here would be... Is my 6100 able to use any of these?? Also, I did back up to the flail mower and it looks like my lower arms on the 3-point, weren't long enough to hook up properly...

I just have a lot of questions here... Any advice appreciated!! Thanks in advance!! - Travis

Now that you have all the attachments, trade up to a 25-30 hp tractor...

 

[mikkeeh]

Wow...nice score. In my opinion.....I would think that most all of that equipment is too big for that tractor. I think you only have 14hp or so. The finish mower MIGHT work if on flat land and not cutting very high grass. My B7500 (23hp) works pretty hard pulling a 5' rear blade full of gravel.....so 6' would be out of the question for you.
Not sure how heavy the rollers are, but i use a 48" with my 21hp zero turn, and it seems about right.
The PHD might be ok if you have enough lift, and the ground isnt too heavy.
I dont have much experience with the flail mower.......but I would guess it would be in the same catagory.

On the bright side.........it all in demand kinda stuff, and should be really easy to sell.

Hope this helps