Good morning. I have a G5200H with the 46" two-stage snowblower and I do not have the assist lift springs, pn# 70060-01359. I really don't want to pay $50 each for new ones so I'm wondering if anyone knows the specifications (length, tension, etc.) on these springs that would assist me in location a suitable replacement. Thank you for any and all advice you have to offer!
Assist Lift Spring
- Thread starter Tiberius
- Start date
from Google..... 1 1/2" x 9"
I don't know about wire size, but it's a start.....
maybe spring for front mounted snow plow ,saw for ATV, might be 'close enough ' ?
I don't know about wire size, but it's a start.....
maybe spring for front mounted snow plow ,saw for ATV, might be 'close enough ' ?
Knowing the dimensions, means the 'strength' of the spring will be determined by the wire size. thin wire, weak, fat wire strong. I'm guessing something made from 3/16" wire would be 'ok' ??
be nice to see a picture of a real spring
www.mcmaster.com
should help.
be nice to see a picture of a real spring
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
should help.