Z482 generator build insight

S

sgleshot

New member

Equipment
tractors
Oct 17, 2019
1
0
0
Ellery Center NY
Hello everyone,

I acquired a generator assembly a few months back, upon inspection the generator generator windings are bad. The engine is a z482 which runs like a top. The generator is a Markon brand and apparently they aren't easy to find. That being said, I am looking for some input as to the best route to go as far as attaching a different power head to this motor. If anyone has any links or information as to how to mount a new gen head thoughts on the matter, any input would be appreciated.
 

Attachments

L

littleorangetractor

Member

Equipment
B2650, LA534 Loader, B2782 Snow Blower, B6000 with Loader
Nov 12, 2017
51
0
6
Sault Ste. Marie ON
You could take the generator to a motor rewinding shop to get an estimate for repair but it may not be economically feasible. Unless you are looking to have a diesel powered generator for better fuel economy during long run times, a lower cost gas run-generator would be less expensive for occasional stand-by duty IMHO.
 
G

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,909
4,063
113
Greensville,Ontario,Canada
well, first off, acording to Google, your engine is rated for 10.8HP. That's probably flat out, so realistically it'd run a 5,000 Watt generator, about half what you have.
you'll also have to decide upon what kind of feedback to control RPM as gennys have to be stable to maintain constant frequency ( 50 or 60 Hz).
 
You must log in or register to reply here.

Top Bottom