Search results

The front grille fit is not the best on my old L5450. Has anyone converted their similar unit to slide in screen to keep dust/seeds/whatever from clogging radiator? I've already moved battery out of that area.

I've made a big mistake changing power steering hose from pump to controller. Four hoses feed bottom of controller making things very tight. The line affected is on left, closest to seat. I mistakenly removed the bulkhead fitting connected to the hose that is part of the controller. A small...

I have an L5450 with an LA1150A loader that blew out hydraulic cylinder over the weekend. All four cylinders are supposedly the same & call for the same Kubota repair kit. My parts manual does not cover the loader parts so i need the repair kit number. Anybody out there have that info? I think...

Seems most Kubota's have clear fuel filter housings? Have you looked at that container to see that it is full of fuel when you are in the middle of the problem? I'm also thinking that temperature is involved as you indicated? Seems weird it never acts up in cold weather? With that said, I'm...

Hey, thanks for all the input here! I think I'll have to try a set of those Gator blades. This has been a big help & maybe save a few bucks too!

Has anyone out there used Oregan blades on mower decks enough to know if they are equal to or not as good as Kubots's? Seems to be some savings with Oregan blades, but sometimes saving a couple of bucks can cost more in the long run? Thanks

Hey guys, I'm looking for other front deck mower users. My problem is too much clippings being blown up in air in front of mower deck & me having to breathe all that stuff. The deck is set by the book to a 4" cut. My first thought is to lower front of mower deck a notch or two to see what...

I just had a safety switch go out on my L4800. It was mounted under dash. It is involved with safety lock out features, like seat, pto, clutch, etc. It could be possible your tractor has a similar device? For a while I just wired around it with a push button start. Hope this helps?

Removed the tank from L5450 this morning & found a plastic nozzle extension from a 5 gallon fuel container in the tank. Neighbor bringing boroscope Monday for total inspection of tank innards. While its off I want to make sure. Suspect the nozzle was the problem with fuel stoppage at low levels...

I'm a new comer to your site. Looked it up because of fuel flow issue on an L5450 just aquired. While reading threads about fuel flow issues it was very apparent that the guys with a problem never closed the loop about what finally solved their problems. A closure reply would be very courteous...