Search results

I am resurfacing my head and I was wondering if i need to reinstall it with a shim or not. If so is there a certain way to do it. Do I need to spray anything on it to set it? Also I was wondering if there is a certain orientation that the water flange gasket has to sit. There is circular...

In order to get the belt on or off the main pulley it must come off the drive shaft for the front loader hydraulic pump. The drive shaft is sectional but still won't allow me to remove it due to lack of clearance. The only way I see is to remove the hydro pump. A big messy hassle. Is there an...

How do you go about replacing the fan belt with hydraulic shaft and pump driven by crank pulley? I loosened the piece between the two but it won't drop down.

I took off the alternator and I can't turn anything on it. There is a pile of black dust (probably from the belt) on the underside. The belt heated up too much and started to smoke and melt. The bottom side of the belt feels crusty too. The water pump moves fine. I will bring the alternator...

Would that cause my tractor not to start again?

I was mowing down tall weeds with a 48" deck pto and I noticed a change in power. I then started to smell a burnt rubber type of smell so I lifted up the hood and noticed that smoke was coming from the dynamo/alternator and it also looked like water was coming out from behind the pulley. I...

It all depends how much time I have to run the tractor. I do run it for only 45 minutes at times but I also run it for 3-4 hours as well. But lately it has been for shorter periods of time because it seems to be overheating on me. I am going to flush the radiator or have it boiled out as well...

What does it mean if there is a whitish smoke that coming out of this breather pipe. Sometimes it looks worse than others. When the engine is running hot it does it more. Is this normal or is something wrong going on?

I need help. I need to replace the water flange gasket but in order to do so I need to remove the cylinder head to access it. In doing so what do I need to know so when I order parts I know what to get. I noticed that there is head gasket shim, do I need to order this? Also how does removing...

This weekend I blew my water flange gasket on my Kubota B20. This is where the t-stat is. I thought it would be a easy fix but looking more into it, it seems hard to get to. It sits right behind the water pump. But removing the water pump won't help either since the back of the water pump...