Search results

Sorry I wasn't clear. The backhoe is coming from the loader valve right now. I am adding rear remotes and the 3rd function. When I am done, it will go...loader valve....3rd function.....Rear remotes....backhoe. Thanks again.

3rd function is after loader valve. Thank you!

Related to this; my backhoe currently comes off the loader valve using 1/2" hoses and fittings. The valve for rear remotes will also be 1/2" in and out. The 3rd function valve uses 3/8". Since the backhoe needs to be last in the circuit, can I tee off @ the loader valve with 1/2" going back...

At approx 12:30 in this video you can see how land pride did their version. It does look like 2 ports under that cover.

Thanks guys. I see what you are saying about 2 pipes coming off the base portion, but there must be one port just blocked off because there are 2x 030 o-rings and 1x 020 o-ring in the base. Can't tell from the diagram which ports the pipes go to. Landpride made their version using a solid...

So, in that diagram, the diamond shaped block should be pressure, pressure return, and tank return ports. Then, the pipe labeled 120 is another tank return. Do I have that correct?

I am a machinist, and at work we have tools to help us reverse engineer things. I thought this might be a little tidier way to plumb in. I'll re-evaluate. If I do go this route, what are each of those ports? There are 3 under the cover and one back a few inches that just has a plug in it...

I want to add rear remotes to my MX5800 using Summit Monoblock Hydraulic Directional Control Valve, 4 Spool, 4 Float, 11 GPM. To keep it a clean install, I want to connect hoses from the Summit valve block to the hydraulic ports under the seat, where the factory rear remote valves would...