Search results

Hi all On the top of my b7200 fuel tank, there are two lines coming out of the fuel tank. I know one line is a return line from the fuel rail, but not sure of the other. When I bought the tractor it wasn't going to anywhere, but was just hanging down. Can any one tell me if the other line is a...

I found a rebuild kit for the steering shaft from Kumar Bros USA, that says it'd for a B7200 HST. I found a sector shaft too, but it only references the B7200. Are the sector shafts the same? THanks,

I was using my B7200 HST yesterday, and something happened to the steering. It will turn to the left, but will not steer to the right. Any ideas as to what I should look for? I was online, investigating a replacement steering box, and it seems there is a difference between the B7200, and the...

I have a B7200, that has had the engine replaced with the D950 BG1. The exhaust manifold ports to the right side of the manifold, which prohibits the engine side cover from fitting. I looked online, and the D905 ports in the center. Will the D905 manifold bolt to the D950.

I started greasing my B7200, and noticed there are grease fittings at the top and bottom of the right cylinder, but no grease fittings on the left side. It looks like there never has been. Is this normal to only have grease fittings on one side of the bucket cylinders?

I got the idiot lights and charging system figured out. It was a fuse holder in the headlight harness that was corroded. I replaced it with a new inline fuse and holder. Dave told me to check the fusible link at the starter. I did, and there isn't one. I bought a heavy duty fuse holder, but not...

Thanks for your input and information. I purchased the rectifier and dynamo as a set from Amazon. I also bought a new battery, since the old one was 2017.....ouch...sticker shock. I'll look in to the fuseible link. I am aware of therm and was looking for a fuse in the wiring, but neglected to...

I've been reading several posts on the Infamous Kubota charging system, and I seem to be coming away with more questions then answers. I just recently bought the tractor, and knew there was an electrical problem, since the guy told me, he always disconnected the battery when he didn't use it. I...

Just purchased a B7200HSTD. The engine was replaced with a D950 from a generator. The engine runs great, but the RPM hunts up and down. It seems to get better under load. I'm assuming, being a geneerater motor, the govenor and injector pump was electronically controlled by the generator. Any...