Search results

Thanks. Gives me something to think on. Hooking the 5' bucket to the loader arms seem to give me enough front weight...so I'll check to see what the bucket weighs and go looking for suitcase weights. (the bucket extends the overall length and makes the turnaround at the end of the rows...

bit of a followup. I did purchase the b2650. worked out as the prior owner (80 years old) is often our part time help, thus, no problem with his using the machine. Currently, we have a 800lb. 50 gallon sprayer on the back. Makes the front feel light. Any ideas how much weight I should/can add to...

That's why the current buzz words are 'Globally sourced, assembled in the USA'.

I wish I'd thought to add $500 to the check...I'll find some other way to make it up to him. Heading into harvest season so I might not get the chance to do much more than check the fluids and the fuel and air filters. I'll attempt a followup when I take a good look. Should work well as a backup...

A bit of an update. I contacted the dealer who originally sold the unit (and are the closest for service)...they show no service since new. I'll be asking the seller if he has any service receipts, however I'm thinking there has been none performed. There are 335 hours on the unit, so not a lot...

Would like to determine a price range so I can make a reasonable offer. 2017 b2650 with loader, forks, box blade. <500 hours, appears stored inside It will be the backup tractor to our slightly larger and older Mahindra. (I was surprised that it could pickup a bin on grapes using rear...

Going in and out of vineyard rows on a slight slope...thus is appears the standard 3 rib will work over the R1 ag tread...thanks for the info

I recall it was around $150 each plus $35 shipping for two. I measured in inches...e.g. 3.5" pilot, bolt hole sizes and distance apart, wheel width and thickness...(4 x 12) and a picture showing offset, and they came back with the correct measurements in mm. Haven't received them yet (I recall...

I once brough in a 1 ton flat bed from Canada to the States...turned me back at the border...for...a speedometer that only registered in Km...so I drifted East and around 3 am tried another crossing where they didn't blink, just waved me through.

Our Kubota 2201 came with 3 rib tires which have aged out (40 years). Any reason you can't put a more aggressive tread on the front, similar to what you'd find on a walk behind tiller (ag tread?)

i got through to heywheel and ended up having them mfg. 2 wheels...thanks for the lead

I notice there seem to be more options for a 6 bolt hub vs. the current 4 bolt. Any place offering such?

removed the 50 gallon pakblast sprayer from our L2201 and mounted the 15 K betstco generator (always have to repair/upgrade their products, but the price point is usually worth it). We use the generator as a backup since the power goes out at least 6x a year...the 4 speed pto on the L2201...

We purchased a nice little L2201 (similar to a L245?). 1200 hours, original tires and rims...yup...looked great until they were low on air and you can see all the age cracks in them. Anyway, put new tires on the existing rims in the back as the rims are in good shape. The fronts...not so much...

What's an ORC?