Search results

Thanks a tonne for your help i will update you

Thanks @Fishfarmer This is the info i needed , yes the 3 PT worked before my oil change without any issues, after the new hydraulic oil replacement i have been trying to make it work for so long but it doesnt, and what you said about how the air gets trapped and oil just keeps going back to...

I have just done a small overhaul and got some upgrades on my 4500DT but the 3points still dont lift , the neighbor who worked on my tractor said there is no pressure in the high pressure line and when he opened the filter there was hardly any oil in it. But the power steering part still works...

Thanks @GreensvilleJay it seems to be fitting snug on the exhaust pipe, its an old tractor so i think there is a lot play that has occurred in joint of the muffler. i will look around for shimstock thanks for this idea

For a vertical exhaust on Kubota at the bottom end which slides over the pipe from manifold i have major smoke leak , there is no rusted or broken metal its just that the pipes dont make a snug contact , i have a very very tight exhaust clamp on top , even then there is smoke coming out from the...

Thanks for this clarification, actually I will double check the filter tomorrow as that was one of the first things I cleaned and now don't remember if I did a good job seating it back properly, I tried the backing up and keeping transmission higher than pump method and cracked the inlet but it...

Thanks for all the cues , i will do the same tomorrow will report back , oil level checked today , was slightly lesser than max.

Hi Wolfman Thanks for quick reply , i tried turning it back and forth many times with revving the engine but still there is no lift , do i i have keep turning it until i stop hearing the weird sound from the power steering pump ? It seems to be very difficult to turn as well looks like its...

what was your solution to this problem, my 3PT wont raise after oil change and i have done debug like yours but still no lift , this was working before hydraulic oil change, one more thing i noticed is that the power steering works for me but makes a weird noise and goes tough sometimes ...

Not that i have seen maybe the other owners of M4500DT can confirm/correct me, but i haven't seen that procedure in WSM

I am having similar issue after oil change my 3PT wont lift , so if i understand correctly you had tried priming the pump with oil in the inlet side on level ground and it wont work ? i tried it today and still with the lever control there is absolutely no movement , no sound , power steering...

It does have a front pump for the loader , so i think it wont matter as that pump takes its hydraulic fluid from another separate tank , which i also emptied and refilled but maybe it didnt lose its prime. One more thing to note is that whenever i use the position control lever for 3PT , there...

Thanks a lot I tried , very difficult to reach when loader is on, when I removed it there was oil dripping from it , I triedy best to fill it up with UDT hydraulic oil, locked it back up but still the 3PT doesn't wanna raise , anything else I am missing , is it separate from loader function in...

@007kubotaguy i am assuming you are referring to this pump and I presume I can only dump oil on top inlet on left coz the bottom inlet won't allow me to do anything against gravity

A few more point just to ask the experts to throw to see if i have done anything else 1. Changed Hydraulic/Tranmissions Fluid 2. Opened and inspected the Hydraulic Filter , Filter looked good and used the same O ring and put it back 3. Used Anti Rust on the Draft+Lift Control Levers as my...

FEL and power Steering works good

Thanks for the suggestions my FEL works great without any issues but I guess as Kubota guy suggested Thanks for such a directed answer , so m4500dt has 2 pumps , I think I kind of know where is this pump u are talking about and I will try your suggestion , power steering and FEL both are...

After all the oil changes , my tractor took the longest to start but i think i had too much air trapped within the fuel line which eventually with my consistent bleeding the line finally cleared and tractor started , now the 3 point hitch wont raise at all, can anyone guide me what am i doing...

Thanks Wolfman and John , It is the S2600-A Engine Wolfman , I will follow some baby steps one by one and see what i can diagnose going forward. Cannot rush into it as you suggested

The older Block heater in it doesn't work so i am going to swap that block heater and will try again today and will update how it goes , after which i will try an oil change.