Search results

Dealer has leveled it 2x I run in float mode Rpm is maxed ground is frozen 20 degrees today it does the same things

Do you want to sell me your Bolens? Anything has to be better than this p.o.s.

Rotation of fan and augers is correct no sheer pins broken

Shear pins all good, augers offset 180 degrees, fan sheer pin good. I couldn’t even try to blow a 2” snowfall the augers are 2.75” above the ground level. All these points have been verified by me and dealer. I even had dealer come to house and show me what I was doing wrong, he jumped on the...

No I am now in second winter with this blower. I am truly convinced it is the worst piece of equipment I have purchased in 40 years. Dealer keeps telling me they sold lots of these and I’m only one with an issue. I have asked to speak with the rep several times but never get to speak with him...

There is no chain drive this has transmission in front of fan ans two piece blower auger

Two augers one right side to center and one left side to center gearbox in middle driven by shaft thru center of fan "blower" because the gear box in center design it leaves a gap in the middle of about 10" with nothing but forward motion to push and pile snow into the blower fan. Terrible...

I can float or use down pressure with no difference and have used both mount locations to give it the most forward angle it still Pushes snow piles wet or dry piling it up before blowing a few weeks ago it was 5 below and snow was dry like sugar and still won't feed into fan unless it likes up...

Both augers are turning no chain to oil on this model if you have a chain your blower drives auger from the side with no 10" gap in the middle in front of the fan so your auger feeds the fan On my model there are two augers with drive gearbox in middle leaving s 10" gap in augers in the middle...

Sheer bolts in Auger's and Fan are good. Augers are rotating correctly driving snow to center by fan. Augers are clocked 180 degrees apart. When running everything is rotating in the right direction. I can't post video Im trying to convert it so I can, this is a video clip in 4" snow. Best I...

Not really happy with my new LX2963 blower. It pushes snow 2-3 feet in front of the blower no matter if you are going slow or fast and piles up in the middle. The augers move the snow ride to side in the middle but it seems like only forward motion and pushing a pile of snow will push snow back...

I used my LX2601 and my new LX2963 snowblower for the 7th time snow blowing this winter. I can say this is frustrating. The snowblower has to scoop and push snow to about a depth of 6" before the augers 2.5" off the pavement start to feed the fan. Had 4" of fresh light to medium snow and by the...