Search results

Is it possible to set the zd326s in free wheel to push/tow it?

got back to it.. changed the fuel pump as well.. ultimately.. I THINK I've found the culprit. The ( K1253-62050 ) Power regulator connector is corroded and shot to hell.. When I disconnected the wiring harness, one of the blades came off the regulator side.. additionally, 2 of the wires...

figured it out.. Found the switch and bypassed it.. started right up... Pulled the switch off and noticed one of the 4 wires was ripped to hell... repaired that and we're back up and running!

Soooo.. I just finished replacing every seal and bearing in the front left and I went to fire up the tractor and I'm getting a Shuttle Neutral message and no-start. I'm assuming this is a safety switch on the F-N-R shifter on the steering column.. No idea where the switch is, or what else it...

Probably a wednesday project at this point... Finally got the parts in today to rebuild the left front side of my L3240.. Got the bearing races out today, so tomorrow everything can go back together.. Thankfully after that the L3240 should be back up and operational and I can concentrate on the...

no salty water wet, but it did get rained on a few weeks prior.. so it's possible that could be contributing, if not the root cause

worked on it a bit today.. It's important to mention the following - I jumped the starter yesterday and mowed a bit.. It sputter (like it ran out of fuel) and died.. managed to get it jumped again after towing it back to the barn and it ran very low RPM for a bit, then got up to speed before...

Haven't had much time to troubleshoot as I'm in florida and dealing with post-hurricane issues.. Anyway, I ordered a stop solenoid just for kicks and I'm going to start tracing the harness, specifically back to the relays, etc.. checking for continuity along the way.. Will report back as soon...

So, the short version is my ZD326s is giving me trouble starting, I can start it by jumping from the positive lug on the start to the solenoid. I was mowing, parked it, came back 5 minutes later and it wouldn't start. Symptoms - Flickering or non-illuminated lights on the Easy Checker with...