Search results

I have no dog in this fight since I have the older snowblower tab A into slot B connection but have been following this thread out of curiousity. The attached photo is from one of river19 posts showing one of the couplers straight from then end. To my eyes it appears to be eccentric between...

I would sure be trying to modify and incorporate a lovejoy coupling into the poor design. Can't believe anyone could ever think metal to metal slamming together would not be a problem in this situation. Even if a guy had to modify the existing parts to add modified lovejoy parts, it seems like...

Very slick set up to allow swapping between loader bucket and front blower. How do you limit the loader arms when using the blower so you don't lift too high and cause an issue with pto shaft to the blower?

Nice job problem solving with your own fabrication skills. I see your Ginop Sales sticker on your tractor, I have that same sticker on my B2650.

What kind of debris is getting in your snowblower and jamming the impeller? Do you have a neighbor throwing junk in your driveway to mess with you? Do you have tree branches that keep coming down in the wind and hiding in the snow? Maybe a solution to deal with the debris is easier than...

I cant say for sure either after more thought, and I have never looked into it either.

The B3030 is fully hydrostatic, there is no clutch.

Most cases scarifiers on ice will not do much besides sliding right over. Ice is a tough bastard to deal with. I have a concrete driveway and the ice is there until the temp warms enough for the concrete below to loosen its hold on the ice. Only then does my box blade start to scrape it off...

Lots and lots of folks run a front snowblower and a blade of some sort on the rear three point hitch. You can run a back blade or a box blade.

I had a 2006 B3030HSDC with a 51" wide B2781 front blower that I sold when I upgraded to a 2018 B2650HSDC with a 63" B2782 front blower. The B3030 is a very capable snowblower tractor, and the B3030 will not have any of the emission and regen crud on it. The B3350 replaced the B3030 and had...

Working area of snowblower is sprayed with molybdenum disulfide. This was my second use after applying and it worked very well with the extremely cold temp and fluffy snow. My first use was in temps near 32 F and didn't seem to help much with wetter snow. Hope it's effective with temps in the...

Got to use my covers from bird dogger on my B2650 today and they work great. I'm in the Traverse City, MI area where we are currently getting hit with a blizzard. Pictures are after a couple of hours snowblowing in -5 degrees F and 25 mph steady wind. Front grille and top of hood free from major...

Big fan of Ford cars from the 60's. At one time I had seven different rides stashed in the shed at the same time, but down to just Mustangs as they were my original interest. Here is my 66 that I've enjoyed for the last 26 years.

I would think that the slotted adjustment of those shoes would allow the shoes to adjust themselves over time. The factory Kubota Shoes I have use a series of square holes rolled at a 45 degree angle and use a carraige head bolt. No way they will change height on their own.

It looks like there is now an added retainer available for the B28781A and B2782A sprocket in the reduction box. Attached are screen shots of both reduction boxes. The 2782A now has component 350 which appears as part of a kit. The sheetmetal cover over the large driven sprocket is also...

There was a change in the way the sprocket is retained at the back of the impellor in the reduction box. I had a B2781A on a 2006 B3030 that used two set screws as the only means to retain the sprocket. I now have a 2018 B2650 with a B2782B snowblower, and it uses a seperate bolt on retaining...

Yes, I should have had the tractor a little farther back on the trailer, or adjust the hitch height.

B2650 with B2782 63" front snowblower and 6 foot box blade on a 20 ft Big Tex with monster ramps.

Thanks bird dogger, I started a conversation for the pdf of the service manual. I agree the B2650 is a great tractor, perfect size for my needs.

Picked up a new to me 2018 B2650 with cab, B2782 front blower, and 6 foot Land Pride box blade. Looking forward to winter and clearing snow with it. I missed that the headlights on the front of the hood don't come on with the dash switch. I didn't notice that they didn't work when looking it...