Search results

  1. G

    Photo shoot anything lately? Random Photo Thread

    Did some wildlife observation yesterday and today…
  2. G

    Hydraulic Top Link Kit

    I have not taken the time to figure out a way to support the top link at install timing (like a bungee or strap or something) or made jigs…I suppose if setting on concrete or flat area, you could make a stick to length for each implement and just use that as a gauge that would be repeatable...
  3. G

    Hydraulic Top Link Kit

    I have a Fitrite and it works great when using a QH. When not, it’s on/off and trial and error. Not convenient w/o QH in my opinion, but it’s a real game changer once connected. IMO the juice is worth the squeeze.
  4. G

    #1 missed maintenance item

    Maybe using the wrong lubricant then?😉
  5. G

    #1 missed maintenance item

    I pledge allegiance to the flag…
  6. G

    A truck and trailer thread.

    Whoopsies…I must have gotten a little too worked up over the power tilt and tie down rings in the deck. Very nice. 👍
  7. G

    #1 missed maintenance item

    Very interesting…personally I would have guessed wheel bolt torque check as most commonly missed item. Anyway very interesting thanks for sharing. 👍
  8. G

    A truck and trailer thread.

  9. G

    New here first post

    I’m not sure…I did not understand the ‘shipping’ and ‘here’ comments. Nothing wrong with having an extra L470x IMO. A Pair and a spare…now that’s the way to roll. 😉
  10. G

    New here first post

    Personally if plan to hire work out and want a BH, I would get a BH for a smaller sized machine like a B and leave the big work to a pro. That said if you have an L I believe as BH92 would fit and you’d have one less machine to maintain. Just a thought. Oh yeah, welcome.
  11. G

    A truck and trailer thread.

    Damn, you went there…LOL…I thought asking about chains and what was the guy (with driving cap) stance on them…I think would would be interesting to know their thoughts if willing to have head down sorting and packing the split pieces while the dropping down bouncing and probably smashing...
  12. G

    New member, and new owner of a L2502HST

    Welcome and good luck with new machine. I really like the standard Ls…good choice. Only comments I have is related to break in. I am not the manufacture of your machine but i would offer that break in / run in is the final machining of the engine. So a couple things: 0. Consider what you...
  13. G

    A truck and trailer thread.

    Couple questions for you regarding your set up: 1. I dont remember your trim level on the truck (lariat or higher?)…but I wonder do you have to have a subscriptions for some of the services? (I am not a fan of that, but industry going that way…I think at least one manufacturer has that for...
  14. G

    A truck and trailer thread.

    Sure looks like the guy with driving cap on is right under the delivery conveyor? If folks overload their trailer it could be problematic for sure…I hope they understand weakest link and SWLL. Personally I see more really bad balance of loads and improper tongue weight and see folks shaking...
  15. G

    A truck and trailer thread.

    I am not familiar with that tire either. Out of all your trailers and miles pulled, how many treads have you separated from the carcass? I’d be gun shy of knock off tires past their age recommendation. (I’d had a blow out already with some cheap tires that came on a trailer that blew out)...
  16. G

    A truck and trailer thread.

    Good lord that is an awesome combination…I’m drooling’. How old are your tires? If you have not already checked the born on mold date, I would do that before getting too happy with the throttle. (I’d check that and the speed ratings on the tires, including your spare…ounce of prevention) I’m...
  17. G

    FEL install on a 2021 L3901

    I’ve found these to be helpful… https://www.orangetractortalks.com/forums/threads/the-original-tractor-relief-tool-tm-a-must-have.66382/ In the short term the gents up above got you covered. 😉
  18. G

    I finished my carry all build

    Nice job 👍
  19. G

    Opinion on M4900

    To me it sounds like a unicorn. Without additional info on the condition and/or price I really don’t have helpful comments. (If you have some details there are some experts above that will give you solid advice and not just bust your chops - my recommendation would be double check the...
  20. G

    Question for the colective

    Do you have a hitch for a 2” receiver on your bucket? (Bolt on or have some one weld it?) If I were putting a boom pole on, I’d use the hitch and use 2” tube stock. I think length of your pole (don’t make this weird😉) also might suggest other ideas? Edit: just saw @McMXi post and I like that...