Search results

Fixed, I bleed the system and put the old air filter back in and its roaring again. Odd but it worked

Tested with outcomes: Key off .8 volts Key on .8 volts Key start .64 volts Key off 12.10 volts for ~ 8 seconds then back to .8 volts

Found the wiring diagram, hooked the red wire back up. Starts with Key now :)however immediately dies. 😕See video https://youtube.com/shorts/ryCNqQQ-3tE?feature=share

Swapped around all the relays and no changed. Noticed this small red wire was cut on the left most relay. Where does this go? Is it the problem?

Update: took the floor pan off to access the brake safety switch. Tested it and it is working as it should. Tested the PTO switch working as it should. Havent taken switches out of the drive arms to test them, however the solenoid clicks off when engaging them with the key on. tested voltage on...

Thanks so much for your help. That loud click at the end was the solenoid shutting off. I was in the seat with brake on and blade disengaged. The starter does not engage anymore with the key (almost like a safety is defective) I can jump the leads of the starter and the engine will start for...

https://youtube.com/shorts/vBe5WrdUn1s?feature=share

Update: Checked the Slow Blow Fuse = Good, Bypassed the Seat Switch = No Change

I have R1 tires off a L3901 interested in R4

I searched on this forum and found this article which was similar however different. https://www.orangetractortalks.com/forums/threads/zd221-wont-start-electrical-issue.46388/ Back story leading up, I purchased this mower last weekend. 2013 Zd221 with 385hrs. I probably cranked the mower 30...

Same problem, where is the switch located?