Search results

No problem- I enjoyed your post !

I have an L3200- I just purchased the same trailer - I appreciated your checklist as I have seen versions of all of that ! Do you have any pics ? I am trying to plumb into the Land Pride 3rd function - I just nred to dump with no pump ! Thx - Roy

Thx - I will do that as well. The alternator belt was a little loose. I snugged it up and they may also help. I would like to see 14 Volts at the BAT with the engine running. The RPM at 2000 should be more than enough to validate output. Appreciate the guidance on the milliamps !

The battery was as 12.3 volts today and I checked the voltage running with all the lights on. I saw 13.8 volts at the battery. This is odd but somehow it seems the 2 month old Interstate battery is bad ? or being drained somehow. Is there a way to attach a video on this page ?

This is super good advice and I will indeed do this!

Buy a Fluke and see what the amp draw is - Off /running . This seems like a failing alternator.

This was a new Intestate battery a few weeks ago. Think the battery is getting depleted slowly. The jump start got the tractor running and the multimeter showed 13v - (Walmart Multimeter) so my plan , Charge the batt (10Amp) start it and get a proper load check while the tractor is running...

I have been chasing a battery alternator issue. I ran the tractor yesterday and after trying to start it sounds like the starter was not able to engage. There is a steady clicking when I turn the key. The bat was just charged prior to use and the run time was about an hour. The bat showed 12v...

I just hooked up a B series 6***8217; blade to my Land pride 3rd function . The angle is uncomfortably fast. I am assuming I need to put a flow restriction in? Has anyone used this setup before and found what size orifice will slow it down? My plan is to put 2 on the 3/8 side of the hose that...

I have moved and am changing to R4 tires. Set of rims and tires 150 hours of homeownner use. Rears are loaded from dealer with Rim Guard Located in CT 1500.00 I also have a new set of chains for this set -200.00 I also have Kubota wheel spacers -100.00 Please email roaf3@aol.com...

I drove my Dads BX 2230 this weekend. The HST pedal sticks warm and cold. It was not much fun. I read on another post that there were issues with these early on. Does anyone have a parts diagram to look at? Any ideas how to fix this issue? I am a little concerned as he almost went...

The plow was sold today ! Thanks, RD

60"B2765A Plow B2733 Subframe New metal edge (never used ) 1 season on new rubber edge. 1800.00 for both Will separate but prefer to sell together . Will fit- B7300 -7400-7410-7510-7610 - 2410 New price in Ct for this was 2600.00 . Please email or Pm me for details.