Search results

Thank you.

i can’t quite picture how this would work. Sorry, my first tractor experience.

Thanks for the info. Have you ever tried the Pat’s Easy Change Quick Hitch? I’m thinking about buying it as an alternative to fabbing parts or another Cat 1 hitch purchase. It appears that the Pat’s QH allows you to connect to all widths needed.

I have a Cat 2 quick hitch with a lower point 36” spread that I need to connect to implements that are 20”-24” wide. Are there pins or bushings that can bridge this gap? Any other suggestions ?

I originally posted this in Service/Maintenance but think it belongs here. I have been working on a Kubota 3rd Function Kit install and am finding that the wiring harness install is a bit confusing. Working from the diagram in the LA1154A Loader assembly instructions (see below) I see that C...

I have been working on a Kubota 3rd Function Kit install and am finding that the wiring harness install is a bit confusing. Working from the diagram in the LA1154A Loader assembly instructions (see below) I see that C, the kit harness connects to 1, the tractor harness. I can’t tell from the...

In my photo is the capped side on the right with Teflon tape NPT then?

Ok, no sealant on anything with a beveled or flared end then? Just flat threaded ends get sealant?

I just purchased a bottle and will try it out, thank you.

I am a novice tractor owner and just started my install of a 3rd function kit on a M7060. I decided to mount all of the equipment before making the hose connections. Kinda of nervous about screwing the connections up since I only have the loader manual diagrams as a guide. My 1st question is...

Wow, great idea! Thanks for the tip, I will give it a try.

Thanks for the responses. I think the compromise will be that I rent a trailer and the dealer does the install.

I’m considering installing a 3rd function kit on my M7060. Dealer wants $ 300 to install plus $ 400 for transport fees ( 1 hour drive to/from twice). I’ve Been told that the kit includes limited if any instructions. Any advice would be greatly appreciated.

All good tips, thank you.

Newbie purchaser of M7060 with a LA1154 bucket. Going over my fluid level check after running the loader for an hour and wondered if you check the hydraulic fluid level when the engine is warm or cold? My level is very difficult to see on the stick and sighting down the fill hole, I see no...

Found equal insurance through State Farm at a third of the price.

Looks like my next project, thank you.

Do you have a parts list for the electrical equipment that you’d be willing to share?

thank you