Search results

I used Kumar Brothers https://www.kumarbrosusa.com/kubota/steering-components.html They frequently advertise via ebay. There may be others suppliers about too. Rgds Simon

Problem with using any sort of vise grip on roll pins is that when you pull them out of round they expand in one direction and the friction in the hole actually increases. If all else fails take a grinder and grind off the flange of the nut where the pin goes through and then undo with an impact...

That is a hardened roll pin that looks like it has been drilled into the flywheel to lock the nut. Quite possibly a previous owners modification. Hard bit will be removal as this type of pin is not really designed to fit into a blind hole (and they tend to be too hard to drill out) Likely if...

I had the tank on my L245Dt project tractor cleaned and coated internally, unfortunately the tank drain was there when the tank went to the shop and missing when my wife picked it up (and I did not get back in for a while as I was working away). Long story short they have lost the tank drain...

So does an L245DT

Should be this one, Complete kit :- https://www.kumarbrosusa.com/kubota/steering-shaft-repair-kit-L225.html Just fitted one to my L245 and believe they are similar at least that's what the manual suggests

OK thanks, its the front rim I am really desperate for, they are and odd bolt pattern and not many good ones around. Mine has rusted where it was sat with a flat tire and sunk into wet ground for a number of years. Probably should have been a parts machine but where is the fun in that so...

I just found some reference pics whilst looking through my phone, bolt pattern is 4 3/4 inch and center hole is 3 1/2 inch give or take. If your rim fits can you put my name on it and we can figure out shipping? I also need an 11.2 x 24 rear tire for the same machine, do you have one in...

Have the same tractor and following up on various posts on here, understood that Kubota will still supply ROPS for all their tractors at cost. Long story short correspondence with Kubota customer service revealed you need to go to the dealer and have them order "wholegoods item SFL-F27" cost is...

I found a download for the service/shop manual at https://www.manualslib.com/manual/1101745/Kubota-L185.html#manual manual is common for several L series tractors including a 245DT Parts book was a little harder to find but I found a download for that too, just took a bit of digging with...

Description above for 245DT tank removal is pretty accurate with the exception of steering wheel removal (Mine was stuck and only came off when I dug out the 5 ton HF hydraulic puller; conventional screw type pullers would not move it!). Have the same problem with my tank and its currently in...

I am looking for a front wheel for my L245DT to replace one which has rusted out. The 16x5 you picture above could well be it I am away from the farm at the moment so can't go an measure it but I see from the ID on your post that you have an L245. If its a DT any chance you can check if you...