Search results

Update!!!! I cleaned all the pins and greases the machine, cycled it and greased it again. The pins were clogged with hard old grease. There wasn't a hydraulic problem, the machine was binding. Im not sure what the lift capacity is, but I highly doubt its more than 1,000lbs. I was...

Ok. The lines feed a couple blocks on the tractor near the rear seat. One has a bolt on top with a little hex cap that looks like a relief valve, and id imagine the fel valve has a relief too. So i need to try to lift something heavy to make sure its tripping at the spec. I think its...

There is no quick connect fittings. So im going to have to get a "t" fitting. Im going to check it coming out of the pump and going to the fel. I need to see what is "power beyond" so i can tap into that for my back hoe attachment.

So i did some more digging. Ita a 1977 kubota l245dt with a kubota l1200 loader, and a kubota l2075 valve. There is only one stick on the valve. Not 2 like many older tractors Im thinking its the relief valve not the pump. I tried searching the internet for one but i cant find...

It is run off the small gear drive pump on the back of the injection pump. Where to i tap in for pressure. Looks like i need to buy a guage.

Ive owned this tractor for over 15 years. Its old, but operates decent except it likes to run away when its super cold out. When i first got it i used to be able to lift the back of a pick up truck off the ground easy. The tractor would lift the back tires off the ground (no counter...