It was mounted and in place. The pump was removed and remounted. I most likely didn’t keep track of the shims at the time.
I’ll do a compression check when I change the injectors.
Thanks.
I’m going to change the injectors first.
I don’t have gray or white exhaust (excess/unburied fuel) which would suggest late injection. Also, I can’t speak to loss of power at this point.
I’ll report back once the injectors are changed. This engine is a idi engine no longer direct injection.
Thnx.
I have an L4350 tractor. It has a V2203 engine that I transplanted into the tractor. Initial start up went without a hitch. Idles and accelerates fine. After a few seconds of run time it develops a fuel knock. Injection pump shims are most likely not correct, there was a lot of time between...
I took a few more pics, will post.
I took the gear cover off today. The marks on the gears were not lined up. I wanted to turn the engine to get them to line up, I quickly discovered that I had a problem. I couldn't rotate 360 degrees. I figured that I may have moisture or some water...
Thanks for your help again. I’ll take a few more pictures and compare the inj cams. I have a few electric fuel pumps laying around, but I’ll look at drilling the holes, I can’t use the Kubota fuel pump anywhere else.
Question: the front crank nut.... I have a deep 1 13/16” socket for it. I...
The injection lines were off because I was getting ready to remove the intake manifold. I can post a picture of the head if you'd like. I will check the crankshafts/flywheel and oil seals, thanks for the info.
Gentlemen, I am also looking for a set of tires, ag style. If you know of any leads, let me know. I have a few bad hydraulic hoses. I will make them up, I have my own crimp machine......any thoughts on a good source for fittings? thanks.
DaveS
N I Wolfman,
You mentioned that I will need the necessary drive for the hydraulic pump.........could you let me know where that is. The original engine is completely disassembled and in a couple of boxes.
thanks
DaveS
pic five Gear case cover with the oil filter and the extra hose that goes to another oil filter. I will be trying to not changing. this gear case cover. Thoughts?