Search results

a set of vertical lift links for a Kubota B7000 or B6100 or B7100 must have the small pin for the top lift arms. one side solid the other side adjustable. Contact me through the email on my information page

Looking for a set of vertical lift links. left side solid with small top holes The adjustable right side with small top holes. Thank you

Found a set of rear wheel weights for the B7100 All cleaned up and painted. Installed and hope they make a difference when plowing snow this winter. Now to find a set that will work with my B7000. Rear or front.

Hi Just found your post from months ago. I have a B7100dt it came with chains for the lift links I am trying to find a set of lift links for the three point hitch left side solid right side adjustable. Hop you might have those with that parts tractor Joe

Hi I saw your post with the old B7100 with a lot of parts Trying to find a set of lift links for mine B7100dt Left link solid right link adjustable But your post is from July Joe

Trying to locate a set of rear wheel weights for a Kubota B7100 Would anyone know the original part number for these weights. Thank you Joe

Bad part is when I got the tractor it had a tiller on it and links were missing They had chains in their place

Hi Mr Hodge I am looking for the vertical lift arms one solid one adjustable I do have as set of your horizontal stabilizer's well made and work great. Joe

The vertical links between the lift arms one solid one adjustable I have the hodge stabilizer links

When I bought the tractor the link arms were chains. I need the solid link arm and the adjustable link arm for the three point hitch. Thank you Joe

Interested in knowing more about replacing the B750 with a B850. The dimensions are almost identical. Wonder if the pilot bearing and clutch from the B7100 Would be a fit on the 850. Any changes needed that I am aware of?? Suggestions or if someone has done this would be a great help.

Trying to find the correct part number stamped on the Kubota wheel weights that will fit a B7100 Joe

HI I have a B7000 and a B7100 both tractors the headlamps were in bad shape the 7000 was good as far as the bulb holders go. I just went online and bought two led back up bulb lights Worrk good. The b7100 was a mess i purchased and few cheap painters brushes that fit into the light and some...

Wonder if that would be the right size for the B7100?? Just asking I have a B7000 that I was going to use the arms and verticals off of. Just swap them but the B7000 someone drilled out the top lift arms and put in cat o pins. And the B7100 lift arms still have the original holes with the...

For some reason when I ordered valves and guides and top engine seals for my B7000 In the box was an extra. One oil seals for a front wheel on a L185 DT well that is the number and tractor that comes up when I type it in Messicks Parts for Kubota. ?? It is a two piece seal. Have no use for it.

If there are any parts left from a three point hitch I need the two vertical lift arms; one solid and one adjustable Joe

Hi the B7000 was made for Asia No manuals have I found The B7100 manual is close but not perfect. It is for 3cyl yours is 2 cyl engine and the front drive assist is different in the gaskets and seals.

Hi Hope someone just has a set lying around collecting dust lol But the ones that came with this project are just chains which are adjustable to a point. Would like to put the right ones on the tractor One solid lift link and one adjustable lift link. Thank you for looking. Joe

Put new tires on the B7100 yesterday and the fellow told me one of the holes for the valve stem was rusted pretty bad on the inside. they sanded the rim on the inside and put some liquid rubber on the rust and around the valve stem before putting the tube in It looks like it will hold and...