Search results

  1. MINICUP28

    Bx2750d snowblower drive chain problems

    Check the chain tension over a full revolution of the auger. I bent my auger by backing into a frozen snow bank. The chain would go from too tight to very loose. I tightened it some more thinking it was loose. I caught it preseason and replaced the chain. I straightened the auger with some...
  2. MINICUP28

    Bunny hopping when slashing.

    Is your throttle foot being jarred because of bumpy terrain? I have that problem mowing a poorly plowed field. I have to use cruise control at a slow pace to maintain an even speed, otherwise I'm surging in a feedback that gets so bad I have to stop.
  3. MINICUP28

    Best Rear Cat 1 snow blower

    I've had this MK Martin for almost 15 years now. Just put a new chain on it. It gets a lot of use.
  4. MINICUP28

    3rd party rear snow blowers ?

    https://mkmartin.ca/products/singleMeteor.php I've had the 54" blower for the past 10+ years. It works great in very heavy drifts on my gravel road.
  5. MINICUP28

    Raised seat stops engine B7610 PTO engaged

    The engine will stay running with the seat flipped forward when running 540 RPM PTO. If you are running 960 PTO RPM the seat has to be occupied, flipping the seat does not work. I have an over ride switch I use when running 960 PTO on the wood chipper. There are two switches on the seat. There...
  6. MINICUP28

    Mini digger won’t start

    Make sure the lock lever is all the way back: to the left of the seat: https://www.manua.ls/kubota/kx018-4/manual?p=33
  7. MINICUP28

    Propane cost

    I got prices of $1.94, $1.90, & a special @ $1.71 but they add on $20 for safety training etc... I own my own 1000 gal tank. Upstate NY
  8. MINICUP28

    Non-bolt-on Cat 1 Draw Pins

    THIS IS WHAT I USE WITH MY 3PT SNOWBLOWER: https://www.tractorsupply.com/tsc/product/countyline-swivel-handle-hitch-pin-4-1-4-in-usable-pin-length-s071041cts or https://www.tractorsupply.com/tsc/product/countyline-red-head-hitch-pin-grade-5-4-1-4-in-usable-pin-length
  9. MINICUP28

    Roll Call

    PRESENT EVERY DAY
  10. MINICUP28

    Cover for mini excavator

    I CALLED MINE THE MOUSE HOUSE. COULD NOT KEEP THEM OUT.
  11. MINICUP28

    Loader bucket recommendations

    I don't have any of them but I like # 1&2 because the top is parallel to the bottom. Use it as your indicator. #3 doesn't have that reference.
  12. MINICUP28

    B7610 bucket level indicator

    ALWAYS WORKS FOR ME.
  13. MINICUP28

    Battery maintainers

    I have Battery Tenders on the truck, tractor, ATV & RTV. No problems!
  14. MINICUP28

    Will I break the transmission by running chains on rear tires in 4x4?

    17 YEARS NOW ON THIS TRACTOR AND NO PROBLEMS YET. LONG STRAIGHT DOWNHILL GRAVEL ROAD.
  15. MINICUP28

    Proper tool for the job !

    Here is my setup for clearing my 1/2 mile road. 5' clamp-on manual angle plow and 60" Meteor snow blower. Chains on all four tires. The road goes down hill directly behind the tractor with about about 400' elevation change. really steep & icy. I plow downhill on either side and then snow blow...
  16. MINICUP28

    Pull behind brush cutter

    I had this Swisher Roughcut for 5-6 years. I had to replace the drivebelt and both wheels. I got a flat and water got inside the rims and they rusted out. I was very happy with it. I used it to clear a lot of land here. Once I got it manageable for a mower I sold it and got most of my money out...
  17. MINICUP28

    1st Real Snow

    Where is your vacation place? When I graduated from the U of A in '68 my mother moved to Pinetop. Lot's of snow up there. Lot's of snow here today in Cobleskill:
  18. MINICUP28

    Getting ready to retire, what did you treat yourself with?

    I bought the KX018, EQUIPMENT TRAILER AND A NEW F-150.
  19. MINICUP28

    L4200 Trailered Now Won’t Start

    I FREQUENTLY KNOCK MY PTO LEVER OUT OF NEUTRAL WHEN GETTING OFF. CHECK ALL OF YOUR SAFETY SWITCHES FOR THAT MODEL. MY SEARCHES: https://www.tractorbynet.com/forums/threads/starting-problems-on-a-l4200.375467/...