Search results

Hi Again. Do any of you know what parts I need to compete the following installation? 2003 B7500 tractor to BX2537A sweeper through B2733A front hitch. The sweeper came with a front driveline male shaft that is too short (12") I measured about 19"-20" length needed. I think I narrowed it down to...

BTW If anyone finds this useful. I also built this with parts I had laying around. I needed on a Sunday and stores where closed! Probably not very strong but handy as a multi use 3 point attachment point. I originally built it for the (shallow) trencher partially pictured on the left bottom of...

Hi Again. Grazy idea but might work..... Im in the process of buying a front hitch as pictured below and a sweeper attachment. I priced out the hardware missing from my mmm deck and it turns out they are $1800!!!. also a rear finishing mower is about 1k. I have a craftsman tractor i use now so I...

Thank you njr. Loader is on and works great. I will do a short write up about "using the right fittings and not what you have on hand that might break if you over tighten" soon...... I will also post pics asap. 26 degrees here today but I know mowing season is creeping up on me. I will most...

OK google didn't help with figuring out how/where to connect the hydraulic hoses from the control valve. I have two short hoses, one color marked orange and one green and a longer hose that is not color marked. Any info on this would be appreciated as I'm anxious to see this work. Thanks

More pictures

Update: its late so i'll be brief but will post pictures went to dealer, got fluid, came home and muscled the loader in to garage. Took about 4 hrs non-stop to install using air tools and jacks to lift parts in place. will re-check everything tomorrow. Didn't do the hydraulics yet. I don't know...

Thanks man, I will stop by dealer today and get fluid. Hopefully I can start the install tomorrow. I will bolt everything on the base/frame first and then add the control valve/joystick but not connect it yet. then add the loader parts and wait to do the hydraulics last after checking to make...

Hi again question on loader install.: I bought the LA272 loader used from all states AG parts and it came on a pallet with everything needed to install (so I was told). I noticed the hydraulic block that attaches to the tractor was missing an rubber O-ring so I found one in my parts drawer and...

Hi everyone. An update: I have the front loader from a b7510 I posted a picture below. Its sitting on my trailer still but I will try to install it this weekend and post pics again. Any tips/tricks for the install will be appreciate. Still no time to make any headway on the deck identification...

Oh! good advise Chim! I can almost guarantee I would do that first time out! as far as the deck goes I never had a rear deck before and it looks like it would be great on flat ground but not in my case. Problem here is that everybody who had a MMM before and has a RM now recommends it so I...

Ok I just thought I would update everyone on the recent developments in case anyone finds it useful. I just bought the LA272 pictured below. It should be here in a week or so. I read up on it a little and it looks like its not much different than the LA302. 60lbs or so less capacity and no...

Hi BAP I looked there too. Not much love.... maybe Ill try changing the muffler bearings!

Yeah I think the cost for those missing parts is a lot. I will investigate the hydro filter. I have all the maintenance records from a dealer nearby who I called and found the tractor on their regular service schedule. I will look over those receipts to find out of filter was changed. or maybe...

Hmm...maybe I can answer my own question. Maybe the second set of numbers -xxb is the front to back measurement in inches, in which case I might have the -30b!

Ok deck measures aprox 63" by aprox 29". 63" is to the end of the deck, Not the flap.

thanks for your replies @D2Cat: I Have about 2 acres "flat" on top of a hill it was never really landscaped properly so its not exactly flat. there is significant dips and valleys which I will fix/level in time but the biggest obstacle for the pull behind mower would be going around trees and...

I forgot to mention that the only sticker on the deck reads a number K5763-41191 which I think fits the 4 model decks listed below: RCK54-24B (54" MOWER DECK) RCK60-24B (MID-MOUNT FINISHING MOWER) RCK60-27B(A) (60" MID-MOUNT MWR / B7800 / B3200) RCK60-30B (MID-MOUNT FINISHING MOWER)

Hi All I just purchased a used (640hrs) 2003 b7500 HST, Its my first real tractor and I intent to use it as a mower and general maintenance around my 5 acre property. This was my intention but I think I have bitten more than I can chew. I bought the machine very locally for a little over 5k. It...