Search results

SOLD This is a Ford 515 3 point hitch pto driven cycle bar mower. The 515 is driven by a belt and wobble box so it mows at any angle (unlike a pit-man arm driven mower). It has a 6 foot bar and was used on my 16 hp B7100 Kubota diesel with no problems. Also with the purchase is 2 used cycle...

This is a 90's Goossen 3 point hitch PTO driven chipper shredder. It has a capacity of upto 4 inches on the chipper and 2.5 inches on the shredder. It has always been under roof and the chipper knives and shredders are in very good condition. I ran this chipper on my 16 hp B7100 Kubota diesel...

I am trying to remove the lift arms from my B2150. I need to work on the lift brackets for the MMM. Both arms (ie, the swivel balls) at the rear diff case are rusted solid to the pin coming out to the case. I have soaked them over night with WD40 and expect I will have to heat them today to...

I am in the process of restoring a RC72b deck for a B2150. The shafts for adjusting the deck wheel height have to be left bare so they will slide up and down. Is there any type of conditioning that can be done to the metal surface to prevent them from rusting. I don't want to paint or plate...

I need a deck wheel and left side stay for an RO72-B deck. Are there any used ones out there?

One other problem I have to solve on the new to me B2150 is a cracked outer split rim on the front. It has a 6 bolt pattern. Is Robs weld repair in the following link still the best way to go vs paying $100 for the outer spit rim...

This a new to me B2150. I bought it knowing it had the power steering leak. It is a major leak, not a weep. I bought the steering column seal and am going to start in on it tomorrow. I read the following post and it sounds like others just had a weep. Now I am concerned about the needle...

Is it possible to repair a cracked battery cable connector? My grandson has a G5200 with a cracked connector. I need a temporary repair until I can replace it. My first idea was to use acetylene to melt the lead back together. The other was to solder it back together. Any ideas?

My B2150hst has a Hi, Med and low side of the hydro. I have not shifted it into the low side (since I got it) until this morning when mowing some banks. It would not go into the low side so I shifted back up to medium. When I went to come home on the subdivisions streets, it would not shift...

The main current on my starter is not making it through the solenoid contacts. I suspect the contact plate is corroded. Being a refurbisher at heart, I typically take solenoids apart and just cleanup the contacts. Has anyone had the Kubota starter on a B2150 apart and can you get to the...

This is on the RC48-G I am restoring. The idler bearings are shot and will not even move. The inner race of the two idler pulley bearings (080) are stuck to the shaft of the idler arm (020). I soaked it good with penetrant and left it in the press last night. I plan to add heat to the shaft...

I have started on the G5200's mower deck. I have stripped the paint and most of the rust. Today I cut out the rotten areas and have started welding back in 1/8" sheet metal. Here are some pictures for anyone interested...

It is time to clean up the deck for the G5200 we bought for my Grandson. I have everything off of it but the outer spindles. It will get sandblasted tomorrow and then on with the weld repair on the holes in the top of the deck. So, how do I get the pulleys off so I can remove the bolts...

My son and I have been into the B series Kubota's for a while and used Wheel Horses for the lighter work. My 9 year old grandson decided recently that he would like to have a Kubota garden tractor. We have been looking for a while, and yesterday we pickup a 1980 G5200 with 1600 hours. It is...

I am fairly new to hydros. My tractors have been mainly manuals. I spent about 3 hours seat time mowing some tall grass with my B2150 HSD. Power is really good. It has more blowby than I would like at 700 hours, but I think it has had a hard life. The other thing that bothers me is the...

I have a B748 snow caster/blower left over from my B7100. It uses a front PTO. I see where Kubota has an optional front PTO kit for the B2150, so I was thinking I might adapt the blower to my newest tractor. Has anyone used it and does it have the small 17 spline connection or the bigger set...

I am losing power at full throttle on my new to me B2150 with 682 hours showing. I have had the tractor for about 2 months now and have only used it occasionally around the house for lifting and moving things without any problems. This morning I traveled about 1/2 mile on the road to pickup my...

How concerned should I be about crankcase ventilation smoke. I don't have any major smoke out of the exhaust. The power seems fine. I realize the diesel compression is higher than a gas engine and leakage past the rings can be higher as they wear, but my question is how high is too high. Do...

Kubota B6200E HST. 3 cylinder diesel, 15 hp, with 2 wheel hydro drive. Includes a 48 inch belly mower. New battery and good tires. Category 1 three point hitch and two speed PTO. Price: $2500 PM or call four three four six six five 8891. Location is Forest, VA. John in VA

Kubota B6100DT manual drive. 6 speeds forward 2 reverse. 3 cylinder diesel, 14 hp, with 4 wheel drive. Includes 48 inch belly mower. New tires front and back. Category 1 three point hitch and three speed PTO. Price for Tractor and mower is $2500. The hydraulic blade is optional. Price for the...