Search results

when I take the PTO off I can sping the auger, it takes effort so that's why I think mage the chain links are binding, maybe there is rust on the inside of the links, enough to cause drag......I'm clutching at straws here :)

Dave it's on a New Holland Boomer 50, 50 engine HP, hydro unit so it is a low-power tractor for a blower that size but here in Alberta we get powdery snow and I can creep along at whatever speed necessary. It's 540 rpm. It's and 840G Farmking The owner's manual FK313 092010 snow a 5/16 grade 5...

That's for sure...e

Hello all. Winter has arrived and I am having trouble with my snowblower. It's a 7 ft Farmking, 540 PTO, with a gearbox. When I run the unit empty there is no vibration in the PTO shaft and in the impeller. There is a slight wobble in the auger (7 ft wide) maybe and 1/8 in up and down at 540...

My pupper with the highspeed goggles ready for a ride on the X900.

Thanks, Russell, I really appreciate your clarification. I just could not get my brain around what the manual was illustrating. Now if you could only HELP the Broncos on Thursday Night Football.....

I am almost embarrassed to ask this but how do I drain the coolant from my X900 as per Kubota's manual? This is on page 81 of the ops manual. What are they referring to, whatever it is I can't find it? I have drained the system before by pulling the lower rad hose, but what is this?

Thanks, this is the type of real-world experience I was looking for. From what the turbo suppliers say the performance would 35-50 % better. I'll keep the $3000 in my pocket.

Mike I saw this and that's what started my thinking. I looking for real world experience from some one who has done it, example any mechanical failures or operational issues such as over heating.

Hi, I am wondering if anyone out there has installed a turbo on an 900X . My model is a 2017 and I would like more power for hill climbing, as well our altitude is 3500 ft so a turbo would help. I wonder if the rest of the machine, hyd pumps, transmission final drives, cooling system will...

Hi, I just went through that on a 16.9-26 on a New Holland tractor. I would not do it again, better to call a tire shop, they can repair the tire without removing it from the tractor. It's worth a couple of hundred dollars to prevent damage to lug nuts or being injured or killed by the tire...

The title says it all! It's a very good day.

I had exactly the same issue, I got under the unit and tighten every bolt I could find (double check the exhaust) and the problem was solved.

It came up on a google search: Maradyne heaters and performance fans from Texas. They look really good, guarantee satisfaction or full refund and the price is very competitive to that foreign crap from Amazon. It's gonna be my summer project, I will be due for a coolant flush them and will...

Thanks for the info. I will go with this unit, it looks good. SPECIFICATIONS H-400012 MOTOR 2-SPEED DIMENSIONS 7 3/8 in. W x 7 1/4 in. D x 9 7/8 in. H VOLTS 12VDC BTUS/HR 13,200 EST AMP DRAW 6.0

Thanks for the info. I will go with this unit, it looks good. SPECIFICATIONS H-400012 MOTOR 2-SPEED DIMENSIONS 7 3/8 in. W x 7 1/4 in. D x 9 7/8 in. H VOLTS 12VDC BTUS/HR 13,200 EST AMP DRAW 6.0 .

Hello everyone. It seems that as I age the old bones get colder and I thinking about putting in a cab heater. As well my plan is to build a door frames and have a semi enclosed cab . An under dash heater would be nice. Here's the one I was thinking of buying. Has anyone suggestions as to...

Hi everyone, I would like to hear from anyone who has put on after market tires and wheels. I am thinking of going to 14 or 15 inch to get a bigger rolling diameter for more top speed. Plus it looks better :cool: If anyone has done this how has it effected steering, ride and stability. Were...