Search results

Hi all, This is verry strange (to me) It has a loss of overall power, and wanting to stall. It will idle fine at low or high rev, (this is a hydrostatic machine), But shifting into either high or low range it sputters and wants to stall, but shifting back to neutral position it returns to a...

I can't find the weight of the BH-70 back hoe in the assembly or op. manual, What is the weight of the detachable assembly? I do not have ballast in the rear tires, (and Kubota does not recommend ballast AND back hoe together) so when removing the hoe, I want to add a ballast box of equal...

Should this be done? or is that too much rear weight? Currently have the BH70 on my 2301, and no ballast in the tires, But don't ya need ballast when running the loader only?

My 2301, can I find out what year it is? thanks

Hi All Picked up a B2301 TLB with 18 hrs on it. Was using it today for about 4 hours constantly with no issues. then while moving a load of spoil with the bucket, In low range, pressed on the forward pedal and the engine shut down, took my foot off the pedal and the engine came back to life...

Thank You for all the sugesstions! seems I have some work to do this weekend on the deck... What is the "Shade tree mechanic" way of checking if the blades are balanced?

Wow the deck is noisy, Just greased up and still the berings "rumble" is there a better set of berings that are a setp above "Stock"? Thanks

Looking to add a reverse light switch so, just like a vehicle, rear lights only come on when in reverse, on off going forward. HST direction pedal offers its own challenges to this. Any Ideas? Thanks Reamer

Got the doors done, and made the sheet metal templates out of sheet plastic....

Thanks Guys Making a cab and putting hinges on the back is all Pings fault/idea:) Got the door frames welded up and hung with "lift off" hinges. Rear window will be able to be completely removed, and the front will be fixed.. Gonna do heat and wiper. Ping, does your wiper go through the bar...

Think I got it. Hinges off the back.

Hi all First time using the BX-1500 and BX2750C snowblower, Unfortunately the Driveshaft (from mid mount pto to the Quick hitch) decided the snap a U-joint and take an ear with it. I can't find a parts diagram or part number for the drive shaft... Can anyone help on the p/n? Thanks Reamer

Tried a few times on the phots, no luck yet...

Frame is done, still have to do doors/front and rear windows

Done with the frame today! Rotates like yours too so far the cost is $110, and 16 hours of work...

Hi Ping About how much did you pitch in the windshield? about how much on the sides? It has a nice visual look...… Thanks Reamer

Thanks Chim, Ping I going with "flag" hinges, for quick on and off doors. Also going to do a complete "removable" rear window, using Ping's idea of magnets, But ill use a magnetic ribbon to hold in in and act like the gasket. But the front window will be fixed....

And while on the heater topic, does anyone make a quick-disconnect for coolant where it would seal off the coolant from leaking? Acting like the hydraulic quick-disconnect?

Hi Ping What did you use for the door hinges, I was looking around at the local hardware store but nothing other than regular hinges... Thanks

2 cylinder BX1500, where to tap in for cab heat I've been watching Ping's home made cab for his BX, Gonna start one for my BX1500, being smaller and a 2-cylinder instead of the common 3 cyl, where can I tap in for: (A)Flow to the heater, and then, (B) return from heater to the tractor. Thank...