Search results

Good to know for future reference. Sent from my SM-G930V using Tapatalk

Wondered the same question myself until I only had three bolts left holding the case to the engine. The PO had neglected to tighten the loader subframe bolts causing flex at the case and shearing bolts, the output shaft destroyed the weakest link (clutch). That's what I concluded. This tractor...

Got all my parts ,thanks for the pn's very helpful. What is the correct removal procedure of the pilot bushing? That thing is stubborn! I've tried using the inner hole and pulling with a custom hook tool. About ready to just use excessive force! TIA. Sent from my SM-G930V using Tapatalk

Item description for parts kit says release bearing. Is that the throwout or pilot bearing? Sent from my SM-G930V using Tapatalk

Replacing all parts definitely. The wsm says to inspect the plate surface for scratches or cracks so ...yeah ...the input shaft was fine though. The wsm download has been a huge help. Sent from my SM-G930V using Tapatalk

Clutch grenaded. Should I replace the pressure plate as well? Sent from my SM-G930V using Tapatalk

I have had this Kubota B1550-HST for a year and have changed all fluids and filters, greased everything, cleaned screens, changed out water pump and hoses, replaced u-joints. It's been used hard by the PO without proper maintenance. Now I could hear some noise like clanking coming from the...

My B1550 hst 4x4 is making noises near the input shaft on the hydro pump. It does this when moving or using the FEL. I'm not sure if it's a pump in front or what. I just did a full service including cleaning screens thinking it might help or eliminate the issue. Any suggestions would be...