Search results

Thanks so much for the assistance - greatly appreciated.

Thanks so much for the reply, will give it a try. :)

Non Kubota related (sorry) but my friend has an old Ford lawn tractor. It's probably around 1980 vintage. Model is LT 110 model # is : 09JC3156 Anyone know where I might track down an owners and parts manual for this beast? I've looked online and didn't have much success. thanks in...

Bill I was told I could add a third function for a grapple but not without undue cost - in the thousands! If you happen to find out differently please let me know :) And yes I love my B7800 it's a great tractor and I've never had a problem moving heavy wet snow with the loader or the rear...

Go on youtube and watch some rollover videos - not trying to put any fear in you but it was one of the most useful things I did. It's surprising how tippy these tractors can be. As was already noted you don't want to be traveling sideways on hills or anything steep. The "pucker" factor will...

Bill, I have a 2006 B7800 HST, purchased about 3 years ago with only 412 hrs on it. It's in excellent condition but came with a plow and sub frame for snow removal as well as a 5 foot snowblower on rear pto. First thing I did in the spring of the next year was sell the plow and sub frame and...

Hodgy, congrats on the b7800 - I have one as well, think mine is an 07 I've had it 3 years now and love it. I too looked at adding weights but was steered away from that decision by a kubota mechanic who said it's possible to cause damage to the rear axle if spinning the rears with wheel...

The Simon Cowell of Orange Tractor Talks :)

Yes mopar I put in a heater. I hope to get the pictures rotated correctly tonight and I'll post some pics of the heater, it's actually on the site. If I can help in any way I'd be more than happy to help but I'm only an amature....lol

Chim, no the hose that's shown in the picture with one end disconnected is the same size 3/8" on both ends so I had to change both to get to the heater. Because I had very little room to work near the engine I installed two 3/8" hoses from the bypass fittings, one on the thermostat housing and...

Here's a few pics of my homemade cab on my B7800, purely for function and not looks lol but it keeps me warm and dry and cost around $800 Canadian for everything. For some reason these pictures rotate when uploaded, they are in the proper orientation prior to uploading. Not sure why this is...

Got my heater installed and finally had a chance to post a few pictures. Install went quite well and lots of heat in my homemade cab and most importantly it helps to keep my windows clear :) I can have my jacket open and no gloves on in -14 Celsius and quite comfortable so I'm happy. Here's a...

Hope to get the correct switch tomorrow. I always run an inline fuse to whatever I connect to the battery and make sure it's at the battery not 3 or 4 feet away.

Will be picking up a dpdt switch tomorrow, none in stock anywhere this evening.

Thanks so much for the replies guys, very much appreciated. Looks like I'm off to Canadian Tire for a dpdt switch. By the way Hokie the actuator is not grounded just 2 wires coming from it that should be going to the switch. No ground wire. I had those two wires each going to the outside of...

Thanks Hokie, just checked it. Center wire from the switch is common. Rocked the switch changing each outside wire and got continuity. Nothing from outside wire to outside wire.

Looking for help with this one. I have a linear actuator for my snowblower chute and can't seem to get it working. The switch is a sealed 3 wire single pole double throw switch with center off. Currently I have it wired with the center wire of the switch going to battery positive. The other...