Search results

The 3 point hitch leaks down pretty fast even without an implement attached. Is this difficult repair or something simple as an o-ring? I have a partial manual that shows the disassembly but not any diagnosis charts. I don't want to tear into this thing completely if there is a simple repair...

I just finished replacing a piston, bearings and oil pump. (replaced piston due to blowby caused by a crack between ring lands) I have filled the engine with oil to the correct level. After running for 30-45 minutes the oil level has increased and is thinner causing oil pressure to drop. This...

I'm rebuilding my Kubota B5100E tractor engine. I've only worked on engines with timing chains or belts never gears with an IP pump. When I line up the 1 mark with the crank and center gear, the 2 mark with the cam gear and the 3 mark with the IP and rotate the engine they are no longer lined...

I am a new tractor owner and a school bus diesel mechanic. Picked up this B5100E for $900. It run but has a lot of blow by. I installed an oil pressure gauge and has about 20 psi oil pressure at 1/2 throttle and no oil pressure at idle. I have removed the pistons and one of them has a broke ring...