Search results

Out in the open. Covered by UV tarp. Paint is even still good on it.

No hardly any rain. We even have negative humidity in the summer

Ty

I have a L4600 with a BH92 12' backhoe. I have a hydraulic line that rubbed and now needs replacing due to a leak. ALso the cloth sheath that goes through the bottom of the backhoe arm has a worn hole in it and needs replacing. Any advice, tips, or tricks you can offer?

I have a L4600. It is 15 years old and has about 200 hours on it. I did a hydraulic fluid change at 5 months, 10 years (about 100 hours), and 2 yrs ago. Even though it is not called for until the 400 hour mark should I change it again. The tractor does not see much usage but is in AZ where...

OK Guys, It has been 2 weeks and I finally got my tractor back from repair. Basically it was a problem with the number 3 cylinder plunger in the fuel prawn (the distribution bar between the pump and injectors. Problem was self imposed when I changed the fuel filter. I had to bleed the...

Thx guys appreciate all the advice! Moving the injectors was brilliant advice. Will let you all know what it turned out to be. J

Thanks cat After the fuel filter change it had 2 times in 16 hours where it would just loose power like it was not getting fuel at all. If I reved it high and let it run it worked itself back out. That is why I thought I might have crud in the tank or fuel line. The kubota mechanic was a...

Thx d2cat. I could. Not figure out how not getting fuel would trash the cylinder Rm

After changing fuel filter and bleeding injectors my Kubota L4600 ran but seemed to not have as much power. The service guy came out and diagnosed that I had a fuel injector that was not providing fuel to the number 3 cylinder. After pulling and retightening all the fuel lines it started...