Search results

Yes. I have used Messicks also. Excellent service. Use AnPost's Addresspal service in NJ to avoid difficulties with addressing to Ireland.

Understood. I had transferred this also from the original broken cylinder along with control levers and fall adjuster. There is a small adjustment needed to allow for the different relative position of the connection to the replacement lift arms which are slightly bigger than original. Thanks...

Thanks for all the helpful advice. As the lowering control valve was duplicated on the control block from the original machine, I swapped the covers (for the other one pictured right above) and now all is good. I tool a look at the valve on the problem one. it had been turning freely but it's...

Replacement made. 3PL lifting and holding but will not fall under any circumstances. Have removed piston head on expectation that there is some blockage in the valve preventing back-flow. Arms dropped immediately on removal of the head so at least piston is not jammed. Will dismantle the...

Looking again at the B1600. It does have a leveling system albeit a much simpler one. The question now focuses on the cylinder head details. Attached shows the two variants on the cyl head. Also. Main casting on machine seems to be some sort of alloy on the B1600 while the B8200 appears to...

Thanks Dave I will post some photos over the weekend. The B1600 did not have any feedback control that I could see. i assumed that the rather complex controller on the 8200 was something to do with keeping a harrow or other implement at a constant depth.

I am putting a 3PL assembly from a B8200 onto a B1600 The B8200 has an oil pressure adjustment screw on the hydraulic cylinder cover. I am wondering if I should change the cover for the original B1600 one which does not have the adjustment. The adjuster is seized and I would prefer not to have...

Hi Tim I hope you found your spare part. I eventually bought a full B8200 for scrap and took the 3PL off it. Base fit is same as you said so it should work. The B8200 has an oil pressure adjustment screw on the hydraulic cylinder cover. I am wondering if I should change the cover for the...

Thanks Wolfman I am looking at a getting the unit shipped to Ireland but it slips in between small package and pallet size. Also, the courier companies only offer airfreight. I would prefer to ship by sea with a consolidator. Either way, if another buyer also wanted one in EU, it would make a...

Hi Tim I have located a secondhand part in USA for $250 but freight is more than purchase price (with no good guarantee that part will be a fit) Do you have the page from the B8200 parts manual showing the assembly? I have reason to believe that several of these parts can be sourced...

Thanks. The B8200 casing looks identical. I will add that one to the list of suitable donors.

Tow chain on front which I should have taken off before using the rotovator came loose. You can guess the rest!!!! If I had seen someone else doing it, I would have warned them of the danger. Double standards or what?

Here is a pic of the rather sad casualty

The housing for the 3pl hydraulic or even the whole assembly.

Thanks for your comment. See attached copy of page from parts manual. I do not have any cross ref for new part number.

Anyone know where I can buy this part - 67111 3631-3 - secondhand or new. I am looking for the housing but would consider the full assembly

Yes, the belt cogs are probably for improved lifetime. The blades definitely do not overlap.

All replies appreciated. This one is a puzzle. Gearbox looks like a John Deer f725 but no other similarities. Heavy machine at 100kg plus. Looks like a substantial maker but nothing online at all like it

Discharge is across the back. There is a worn rubber deflector there. I don't think the blade actually overlap in their travel. I will check tomorrow. (the pulleys are not toothed)

Can anyone identify this mower deck. It has two toothed drive belts which are tensioned by moving gearbox on mounting plate. No ID marks anywhere!