Search results

Yes I did the stupid , I put my battery charger on my tractor with the switch on and when the switch went past the 12amp charging spot to the 75 amp cranking the voltage smoked my voltage regular . I turned the switch off but not soon enough. I charged the battery and loaded the tractor and went...

A Friend said yesterday to change the type oil filter ? He said some of the ones he run into restricted the oil just a little too much ? that may be the problen . and he also said to use 40 HD oil. ? Grady

The cam and bearings was well within tolerance, I added rod bearings new pistons and rings along with main bearings. The oil pressure stays at 18 lbs. (I Installed a Gage) when at 3/4 throttle and drops tp 1-2 lbs when returned to idle ? . I am using a standard HD 30 weight oil, not one of those...

My rebuilt B6100E has a 18lbs oil pressure ? . the engine was completely rebuilt. She runs great with no rattling so I thought it may be the Light not working properly , During the rebuild I rewired the tractor completely with new oil sending switch also ? . The manual shows an oil pressure...

went back to Ebay the tractor and Equipment is at 770 with one day and ? hours left. Good Luck GT \QUOTE=guilt trip;17143]look on Ebay I seen two B6100E's around 800 bucks this morning with a few days left one had two or three pcs equipment with it . you might pick one of them up for 1200 -...

look on Ebay I seen two B6100E's around 800 bucks this morning with a few days left one had two or three pcs equipment with it . you might pick one of them up for 1200 - 1500 bucks . that would be nice I justy paid 500 for a used head. take a look . GT

I had the same problem . I picked up a set of four different sizes from NAPA auto store and they really come out easy just tap a couple times on the end to drive the point into the fitting and turn slowly and they screw out. I have changed all the grease fittings on my B6100E . These Orange...

Price Quote from NAPA auto parts store yesterday on a clutch for my B6100E, Tony said 36 bucks. I'm calling my dealer today and find out the dealer price. I just paid 140 bucks for brake shoes from a Kubota dealer. GT

I found one 500 bucks and it comes with new vale job ? beats 860 stripped from Kubota Parts Dept. GT

I haven't priced one but I just rebuilt mine for about 50 bucks. But I need a cylinder head and their 800 bucks from dealer parts and 550 bucks from a big Kentucky tractor salvage yard. good luck GT

On a Kubota engine how do you remove a cylinder lining out of the motor block, I was told they are dry linings ? . the # two piston hole is worn 10 thousands over , TOO much to run right if at all. It is using oil. the other two pistons hole linings are within 1 1/2 thousandth over so they will...

Need B6100e Cylinder Head, Mines Cracked big time, no repair in the question. GT

Can I remove the oil pan & head and install bearings and rings without pulling the engine ? . I have the b6100e on motor stands reworking everything except the motor, tyranny and hydraulics at this time. the baby is naked the motor smokes a little and the exhaust pipe is black and oily. I have...

OK I'm in the process of reworking the B6100E from the running gear out so I'm going to need stuff, should I go to my local dealer or will someone here may have some of the items I need. to start with both wiring harnesses the main one and the smaller hook-up one under the dash needs replacing...

OK I'm in the process of reworking the B6100E from the running gear out so I'm going to need stuff, should Ii go to my local dealer or will someone here may have some of the items I may need. to start with both wiring harnesses the main one and the smaller hook-up one under the dash needs...

Thanks, GT

local body shop guy said they could braise a section of metal on it and float fill the small holes and seam with "Duraglas" a fiberglass/plastic product . He also said if it's going to be a show tractor order the hood, if you going to to be nice looking painted and work tractor repair it . GT

Kubota paint $38 bucks quart @ Dealer Farm Equipment Valspar Enamel $38 bucks a gallon @ Tractor Supply has anyone tried , TS paint. Or is the dealer paint that much better. GT

I need a Bonnet/Hood for my B6100E, the one I have has several issues from battery acid damage to rust, no dents though, I am doing a visual rebuild (paint job, new wiring, clamps, hoses & etc.), if it can be seen it's getting attention. The idea of laying down 600 bucks for a new hood ant...

I was wondering about the stump and new tires ? . Glad you went back and took care of the problem . GT