Search results

Is there a rack that I can drive my rtv520 on to elevate it for servicing Thanks

Do I have to use Kubota Oil in my oil change for my RTV520 and what type do I use here in central Florida 10W /30 or 10w/40? Thanks

It's a Kubota L3901, I will take your advice. When I open the bleeder valve how long should I turn the key on for to get fuel in the filters. thanks

Do I have to bleed the system after changing the water separator filter and spin on fuel filter. I would usually fill the filters up and replace. Thanks for the advice

Thanks so much, Later I will measure under the Tractor for the length I need for my rear remotes, I have a local source that will make the hoses for me,

One more question, Maybe :) What Hyd top link would you recommend, is there a certain bore size I should buy or is there a kit available, sorry that was three questions. Thanks

Just to refresh your memory, I’m the guy that can’t get the Kubota dealerships locally to figure out how to install a Hydraulic Top link for my box blade. I have come up with an idea that might be easy and less expensive. I already have the third function valve for my grapple installed, with...

You are probably right, I will deal with it, not a big deal, thanks for you advise

I believe That's what they wanted to do is place a small manual valve near where I'm sitting so I could operate the top link . I just can't get them to communicate, three weeks now and they are still getting an idea together for me and a price. Maybe I need to find another dealer of a private...

I have place the blame on the L3901 not having the lift power for the weight going into a pile of dirt, I'm use to running a full size cat loader and a 670b john deere grader

I have been operating Heavy equipment for 35 years and the l3901 for 9 years, the powerless curl has bugged me for years, Trust me I have moved ton of dirt with this tractor but the power to dig and fill bucket with out backing out a tab is a pain

I already have the 3rd function valve, i will take photos

I have a L3901 and I do notice when going into a pile of dirt I have to back out a bit to curl dirt into my bucket. Don't seem like a lot of power trying to fill my bucket. Thanks

Kubota says they don't make a hydraulic top link for the L3901 and have been (supposedly) working to figure how to install one. I'm Not mechanically inclined so it’s tough ror me. Is this a tough job to do and I already have the third valve for my grapple?

Thanks so much, do you have an idea of how much extra hyd fluid I will have to add? thanks

Thanks, I will study my third valve to see if I understand your instructions.

I already have a third function valve for my grapple, I want to add a hydraulic top link, can I come off my third function valve for a remote in the rear for the HYD top link ? if someone could help me figure out the best route I would appreciate it. I own a L3901 that is around 8 years old

A quick question, I have a L3901 HST with 650 hours, I notice lately that the foot pedal for forward and reverse is slow to come back when pressed forward. When I release the pedal it might no stop and creep forward. I didn't notice any grease points in that area. Any advice would be...

Probably should know this but any way, the lift lever goes from 1-8, it only starts lifting at #5. is there a reason for this, thanks for your help