Search results

The block looks ok - but it looks like it's been on the way out for a while based on some of the wear. There is a lot of metal shavings all through the block. Which means that not only is the crankshaft busted, and the conrod bushings destroyed, but the cylinders, rings, pistons and crankshaft...

Well, there's the problem...

Finally (for today) here's a couple more pictures of the transmission and diff. Just because :)

retiredlawnboy - that's a very generous offer and I may take you up on it. In the next little while (not sure how long due to Xmas) I'll be pulling the engine to inspect the bottom end to find out if the broken crankshaft has damaged other things. I will let you know how I get on.

Well, we might be onto something here. My hood is 1140mm long (or ~45 inches). It's only a 5-6 inch difference from an L1501, but that's probably enough for one extra 3 inch cylinder. Doesn't look like there's much complicated about the front end attachment - looks kinda like 4-6 bolts and...

Hi Alexisferos - or Daren Todd. If someone can measure the length of the hood on an L1501 we might be able to confirm Alexisferos' theory. It certainly sounds reasonable, particularly if everything back from the engine is the same

Thats awesome, Wolfman. Can I ask how you determined the model number - I've been trying to determine a definitive answer for weeks now, but I couldn't figure out what numbers were definitive. I'll store that page up for when I split the tractor and get the motor out - then I can start...

Ray - everyone hates a smartass :D No-one needed to hold a gun to my head - she was a beautiful little tractor, well looked after - much nicer than other similar ones I'd seen. Started and ran beautifully - right up until the day a few weeks ago that the crankshaft broke. I knew it was a bit...

Thanks Daren, The serial number plate is really hard to read as it's been painted over with a thick paint, but I think I've chipped enough off to read that it's virtually identical to yours. L1501 12875 Z751 15 PSI 3000 rpm are the only English on the plate. The Japanese looks close to yours...

I have a bit of a mongrel tractor. And it's got a broken crankshaft. Looks like my best option might be to repower with a new engine - problem is finding out what to use to fit it. The problem is 1) It's an L1501 from the transmission backwards (L1501 - S/N 12875) 2) The engine is a 3...

Oh I wish, Shaun. I have so far been unable to source a crankshaft from anywhere in Australia. The $1400 I quoted was USD (from a parts store in the US), plus probably another $200 USD shipping over here. With exchange rates, that's about 2 grand in Aussie dollars. Then add another large...

Sadly, dtbprc, a broken crankshaft is going to be neither quick nor cheap. Still trying to source a replacement part - they appear to be very scarce, particularly here in Australia.

Ah crap. Apparently I have a broken crankshaft. The problem would seem to be finding a new one now. The engine has been replaced at some stage, from a 2 cylinder to a 3. There is a stamp on the side with 1115cc, which leads me to think it's a D1000, D1101 or D1102 variant. Many of the...

Ok - been playing with it all day now. 1) Emptied coolant. Coolant is rusty, but otherwise good. I let it settle in a glass jar, and there is no oil. 2) Emptied oil. Oil is free of any coolant. Oil looks in good condition. However, there was a small piece of rubber, and a small piece of...

I had the same thought, kubotasam. I have double checked the can it came out of, and it's definitely diesel. I'll double check when I get the fuel out of the tractor on the weekend

Thanks heaps for the advice everyone. I haven't had a chance to empty the fluids yet to check for contaminents - it might have to wait until the weekend - but that will definitely be my first point of call. The tractor does have a mechanical fuel shut off, and the ability to turn over without...

I have a L1501, but with a 3 cylinder engine. I've had it about 6 months now, and it's been purring like a kitten. Using it today - I had started it got it out of the shed, and was just starting to move. Suddenly - a huge clunking noise from the engine. Imagine a diesel knock, except it...

It's got 1115cc cast into the right side of the block. As far as I can tell, both the 1100 and 1101 engines are the same in this respect.

Thanks Wolfman, I assumed it was like many cars - the same body/chassis can take different engines. Sounds like that might have been a bad assumption. So the best guess I have is still that it's a 1501, with a D1100 or D1101 engine in it. Suits me fine - I like the extra power. But does...

Hi Wolfman, I thought the same originally, now I think it's a L1501 (transmission, PTO etc), with a 2xxx engine. The serials I have found are as follows: Left side of engine block (cast) K2-40109 Plate on front left side of transmission (note plate has been painted over during refit and is...