Search results

The 40 series has the hoses tucked between the tractor and the loader frame. The 60 series has the hoses outside of the loader frame. If you have a 60 series and want to reroute your hoses, maybe you could get some ideas/parts from the 40 series?? My guess is that they made the change to make...

I am not sure this is your issue but I can tell you my experience. I lost Auto Throttle control with the foot pedal also. Turns out the Auto Throttle Cable that attaches to the foot pedal was broken. Its easy to see, just look below the tractor at the linkage that connects to the foot pedal...

I changed the Spring on the linkage out to a less powerful spring. It has worked great. Now I dont have to stand on the pedal which shuts the tractor off by the way. Now I just need to rest my foot on the pedal to engage it and the spring still disengaged it like it should with no adverse...

Post the times you have way too big of implement on your tractor. This will be fun. Here is my 40 HP Kubota with a feeder wagon

I fabricated a Remote 3pt lever on my Kubota 3940 HSTCab. This in combination with the Pats Quick Hitch makes hooking up implements a breeze. I purchased an additional factory position lever to use as the actual lever so that it would look like a factory job and professional. Then I fabricated...

Here is a picture of the pinch off clamps I used.

I ended up putting a heater in the lower radiator hose because it was easier. In addition, I had read lots of posts about block heaters going bad that were installed in the engine block because users installed them in the wrong location. This was a really easy install. I just put plier clamps...

Here is a potential design for a Swivel Bracket that would allow the fenders to turn with the steering. This would mount to the Axle Gear Housing bolts for each wheel. What is the concensus? Do you think it is best to go with the swivel mount style or the Fixed Mount Style?? FYI, This is...

The Following is from the Jonesco Catalog. I am planning on using the E2130 on my Kubota L3940HST http://i739.photobucket.com/albums/xx31/lddykstra/Page%201_zpsijqe1wsl.jpg This is a design I have in mind for a potential Fixed Mounting Bracket. It would mount to the Axle guard Bolts. I...

Hi, I am working on the same project as you. I have located a company in Buffalo Minnesota that sells product in the USA for Jonesco. They don't carry stock on the Ag Dunloflex fenders but can get them. Lead time was about 30 days for me. Cost was about $70/fender. Like you, I was also...

I want to add some front fenders to my L3940. I have located the plastic fenders (Dunloflex Brand) but will need to fabricate the steel mounting brackets. I am told that these fenders came factory in Canada but I cant seem to locate the mounting brackets in the USA. I am wondering if I can...

I added adjustable guage wheels to the rear of my blade last winter and really love them. NO more digging into my gravel or grass. When I want to do the concrete areas then i just raise up the guage wheels. On grass I usually try to run the blade edge about 1" off the ground with the wheel...

I agree with the others. If you have a 3pt hitch, these quick hitchs for the bottom links are a MUST. Here are a couple of pictures of mine.

I have a CAB so one thing I think about is how long before I have HOT air blowing out of my vents. Because of this I prefer a block heater though really the 3940HSTC starts in the extreme cold using the glow plugs with no problems at all. They are cheap enough and you really cant go wrong with...

I Bought the Switch from Amazon. Here is the Description "Laser Backlit Blue Rocker Switch LED LIGHT BAR 20A 12V On/off LED Light"

Yeah he wasn't to excited about me leaving him in the cab to take the picture!! I'm raising him up right though, he will be a Kubota Fan!!!

All I can say is Check this out!!! This has become my most used tool. I can shred branches about the size of my wrist and chip logs up to 5" in diameter this this tool. Also the Kubota handles it with ease which is awesome. Here is a Video of it in action, you wont want to miss this!. The end...

Here is a Video http://youtu.be/8Mzp_5xdyXA

Purchased a 20" LED Light Bar from Amazon for $75. Now that I installed this I would never go back to just using the OEM Flood lights. These LED's leave the OEM lights in the dust. This LED must be 20 times brighter. thanks for your post that inspired me wildfire!!! Steps to get this done 1...

Thanks guys, I was thinking of also adding a camera to the front grill so I could better see the ends of my pallet forks. The screen I have will except multiple cameras. Wildfire, can you explain some of the benefits of the infared camera type? Regards Lowell