Search results

I'm running Shell Rotella 10w30. Thought I got that out of the manual, i'll check. I wrote everythings oil cap, type, filter, in the back of manual in the truck glove box so I would have it. Maybe I wrote it down wrong. Again only started when I changed the oil last time. thanks. I see you have...

It is a 10W30. Should I try a 10W40? M9000 has 1571 hours

Well so far checked relief valve and found clean and free. Oil pickup and pan clean. No sludge or metal filings found. Motor much cleaner than I thought it would be. Wife is bringing back a new pressure gauge and oil sending unit. Hoping my old gauge is bad. Been in the bottom of the tool box...

Stepped back and thought about it and this all started right after an oil change. After the oil change the light was coming on so I changed the oil and filter again without fixing the problem. Am I correct in thinking the if the first filter was clogged the relief valve would open. When the new...

It only has about 6 psi at 1000 rpm. My old rule has been 10 psi per 1000 rpm. Not sure what Kubota says. Did learn that the oil pump is not in the oil pan but behind the front cover.

I have a M9000 with the oil pressure light flickering and shutting off the engine. Other post have had a problem with the cover bolts on the oil pump. Wanting to drop the oil pan to check but this in a 4WD with the drive shaft runing thru the oil pan. how do I remove the front drive shaft to get...