Search results

Yes if it’s just tensioner there is a spring

I would spin all the spindles when there is no belt on make sure no play or tight spots, then make sure pulleys are on the spindle shaft properly some are bolted depending on your model some fit on the shaft and held in by keyway and drift. Possible pulley could be bent or squeezed in

Scratch that then.

Prob a long shot but have you checked your intercooler and hose and clamps from turbo and back to intake. Hissing could be charged air leaking and throwing a code and causing loss in horsepower

It was very dry late may early June now we have had some rain Now it’s not looking too bad till the white combine comes 🙄

Haha. My neighbour is a retired army guy he loves his garden sits by it drinking beer all day with his gun shooting gophers. I told him you can’t kill everything that goes in your garden he said I can try hahah. Hard to keep everything out, big critters aren’t to bad it’s the little ones

I also love my m18 grease gun. I used to grease 2 15ft batwing mowers every morning with a hand grease gun, one mower had 20 plus nipples the other had 32 and the cv joint took 30-40 pumps just itself and I said no more to that. electric grease guns are awesome for sure

For sure. Definitely wish I had one sooner. Beats switching out or adjusting top links multiple times a day

Top link I’m quite happy with my top link as well. May put so 90s on it. If I lift it almost all the way up and pull the top link in it puts some pressure on the hoses but that’s minor anyways

I’m not arguing or agreeing with anyone, but not all attachments are created equal. Now if that is a 650+lbs tiller it’s gonna be too much for a bx. I ran a 55 inch mutatori tiller on my bx2680 mind you it was the lightest model at 300lbs it had the least blades on the rotor and I was always...

It just to hang it if you don’t have a quick hitch like a normal top link. I ended up taking if off cause t just gets in the way if it falls forward it will pinch the check valve.

I ordered it from vevor. I know I’m excited as well I have so many rear attachments and the constant adjustment was just annoying

Put my hydraulic top link on. Should save a bunch of time and hassle no one of my attachments is the same top link length. Bingo!

That is one nice thing with rear grooming mowers, maintenance is a lot easier then belly mowers for the most part

M My ex wife sure is yep

$66 USD !! If I lost a fuel cap up here in Canduh it would be cheaper to sell tractor 😝. Some of those moments due end up costing us. Like my neighbour who shut his side door on tractor with his chain hanging halfway out. Chain won

I agree with you on that 👍

Now even cheap Chinese isn’t cheap. It makes you wonder I replaced the output shaft bearing on my mower bought a timken it’s a big bearing about 4 inches around. Anyway got my bill it was 147 dollars and says made in china 🤷‍♂️

Think how good those weights would work if they were painted Kubota orange 😝

There is definitely different quality stuff coming out of china thats for sure. For example I have a westward tiller 72 inch gear drive with slip clutch. $3000cnd comparable landpride was 5800. I asked my self what the difference was the westward tiller was 90lbs heavier and a lot cheaper. I...