Search results

This would make a nice "sticky" A Thread-Pitch Gauge is handy to have in your toolbox.

I picked up 19/6ft lengths of 1" Coil Rod from the recycling yard. HANDY stuff. Here's an example of eBay vs Amazon prices. Crazy.

I decommissioned the previous set, due to being too short. The BB would tip blade-down when moving it. No broken toes. Here's the new ones I made. Longer. Not bedframe rail.

I always wanted one of these. I finally found a lightly used Milwaukee 6232-21 for a decent price. $140. The seller met me half way, so less driving on my part. It come with 3 new blades. I'll be looking into the chopsaw attachment next.

For Future Reference.

These blades are for the RCK54-23BX Deck Bought October 2023 I'm glad I bought them back when I did.

As many of you are aware, I built this Diesel Transfer Tank. Someone (here or elsewhere) suggested a one-way Barometric Valve, but I cannot seem to track down that info... I thought I'd bookmarked. Does anyone have a suggestion for a 3/8" NPT (one-way?) valve? Help is appreciated!!

I got these off ebay last year for a steal. They were pretty scaled with rust, but for $35/shipped, I'll take them. After a bath in Arm & Hammer Laundry Booster and the assist of some wire, an anode, and a 12v automotive battery charger, after 24hrs the rust was gone. I gave them a squirt of...

Those of you who have the "Porta-Band" type, what lead you to buy that particular model?

This is probably relative to all BX models. Where the 3PH is attached to the lift-arms, the top pins, (nearest the toplink) what have people done to eliminate those cumbersome circlips? Longer pins? Clip Pins? Linch Pins? There's got to be a better way. What's your solution to the madness?

Having this surplus of metal I brought home, projects are waiting, and all I have are cut-off wheels. That's a slow process. Today I ordered a LOTOS LTP5000D Plasma Cutter and a 77pc "consumables kit". I also got a "Y" splitter so I can have the MIG and Plasma Cutter plugged-in and ready for...

2-3/4" wide. 3/8" × 3-1/2" short × 6" long Aluminum "L" Now I need to decide on some lights to mount to them. I also plan to use the same mounts for lights on the boom. Mounts flipped. Temp Lights? **The frame seen under the top of the ROP Bar is WIP for a roof.**

I'm curious if anyone else has the Redline SSQA Fork system, who has modified the fork frame for use on the 3PH. I cannot figure out how to do it.

I stopped and got some donuts for all the crew, then I went foraging. :giggle: These (there was over 1000 Lbs of them) are used on ship decks, which are screwed into the deck, for lashing automobiles. I grabbed 30 of them today. I can think of LOTS of uses for these.

BX23s - CHOP THE ROP Height shortened 4-1/2" Drilled and sleeved (from the piece removed. Thought I'd share. Halved in all directions. I used the piece I removed, to make an internal sleeve. Drilled a few holes so I can weld the sleeve to the bar, top and bottom. I'll post more pics...

I scored some angle iron today, I wasn't expecting. I had to go home and get my trailer...lol. All 20ft sticks 1/4" × 2-1/2" × 3-1/2" = 240' And 3/16" × 1-3/4" × 1-3/4" = 120' $311 Unfortunately 5ft had to be cut off each set of six, because they were dragging the ground. They were bolted...

Due to a clearance issue (FEL landing gear "cross-brace" was hitting the mounts ears) all welds were cut apart and ground off back to flat edges. Mocking it up again. After a bit of resizing, welding it back together. Primed, painted, and back in-place. No more clearance issue.

A couple additions (spare pins as well) arrived.

Today I fabbed a receiver into the FEL. The part removed from the bucket, was used to Brace the back. Two days ago I modified my QH with brackets from my 25 gallon JD quick-connect sprayer system. I used it yesterday. Works great. I also adapted (no Pic) a fancy little clamp/handle to the...

I've been using my BH on my BX23S quite a lot. The factory bucket has been slow going, so I ordered the 16" Bucket, extra pins and Quick-On from BXpanded. I plan to order the 6" Trenching Bucket after these pieces arrive.