Search results

FD590V engine not starting. It has fuel, spark, good air filter, and 175 and 180 psi compression. I've read these engines have issues with the plastic cam gears, is there a way to check if the any teeth are broken and it skipped without taking the whole engine apart? The engine was running good...

From the parts diagram it looks like BX2200 fuel tanks are different than pretty much any later BX series like the BX2350, but I'm not sure if they're entirely not interchangeable. Has anyone put a newer BX tank in an older BX? From the diagram it looks like some things moved like pickup, vent...

Looking for the impeller fan for a BX2750 or equivalent snowblower.

Selling my TG1860G (gas) mower with 54" mower deck, 46" snowblower, and 54" front blade. As far as I know these were all the accessories available for this mower. Has ~790 hours, but will go up since I still use it. Comes with wheel weights, chains, and extra snowblower belts. Snowblower has...

Previous owner punctured the fuel tank leaving about 1/8 hole in the back behind the tail light. Pretty much every fuel tank repair epoxy or fiberglass kit says they are not meant for plastic fuel tanks, only metal tanks. Anyone know of a good epoxy that would hold up to diesel and works on the...

Looking for a good condition receiver mount for BX2750D snowblower.

Anyone replace just the boots on the tie rods? They look like generic boots, I'm just unsure of the size and haven't had a chance to measure mine yet. The joints on mine are perfectly fine and still tight, the boots are just ripped. Example picture of what I have on my BX2200.

I'm wondering what the missing lever is in the attached picture. It almost looks like it'd operate the snowblower raise/lower cylinder, but I don't see any hook ups for that cylinder other than the ones used for the FEL. I'm also not finding any diagrams that label it correctly. The manual I...

Looking for the bagging system for the gas TG1860G lawn mower. Doesn't need to have the pulley/vacuum system, but prefer it to be complete.

My throttle cable broke a couple inches off on the lever side. Messicks doesn't list a part for TG1860G mower. Does anyone know the party number? Or the length if I can find a generic one? I'm missing an inch or two so I could probably estimate it but would hate to be wrong and have to buy two.

Mower and snowblower models in signature. I go through about 2 belts in a winter season. It's the belt between the clutch and quick attach pulley that keeps burning up. I can smell the belt burning within 2 minutes of use, even on a brand new belt. I originally was thinking the center pulley is...

I'm looking to buy something that I can manage my 40 acres for hunting. It's mostly thick aspen (95% is under 3 inch diameter) that I want to cut down part of, and trails through other parts. I'd like the option of being able to plant small corn fields, but not absolutely necessary. Originally...

The TG1860G I have has a PTO pulley on the back. As far as I know Kubota never made any rear attachments for this model, they were all belly/front attachments (I think I have them all already). I'd like to see if I can mount a tiller (of any brand) and run it off this belt. Does anyone have...

Started it up, and about a cup of coolant poured out from the front of the muffler. I'm completely at a loss as to where it came from. The only wet spots I found were directly underneath the muffler, and looking with a mirror I can't see any holes in the muffler that would suggest a head gasket...

First off, thanks for the help I've gotten from this site so far! It's been a good resource to help get my Kubota back in action. Second, I don't know where to put this so I'm just throwing it here since this is a little beyond "service and maintenance". A few months ago I picked up a used...

I'm looking for a belt to connect the TG2739A quick adapter pulley to the tractor pulley. The one given to me when I bought it is too short. Does anyone know the part number or even better the length?

My TG1860G has a shock/piston to help raise the deck. Before I buy a replacement piston, I'm wondering how much effort it should take to lift the deck. On the way up, once the slack is taken out of the lever, I have to use what I consider a lot of strength to lift it to the locked up position...

Looking for 2 deck wheels plus the big pins they attach to. My deck is supposed to have 4 and I only have 2. I'll take just the pins too, I can find the plastic wheels elsewhere.

I'm wondering what a good sale value for a 1998 TG1860G would be. Comes with TG2746A snowblower, TG2754 dozer blade, the quick attach coupler, and RCK54TG 54" inch deck. Condition is "good" with no issues, but it's not pristine. Only visible rust is on the blower, otherwise everything else is...

I'm trying to dismantle my snowblower to straighten some metal and take care of some rust, but having a bit of trouble removing the center drive shaft to the gearbox (the one the impeller/auger spins with). It looks like there are 2 set screws on the back of the housing holding the gear onto the...