Search results

I packed a lot of grease around the kingpins on front wheel joints. After a days work, there is so much grease around the front ball joints, that I wipe it off. Is it normal to lose this much grease, or is something worn, such as the dust sheild?

I've just bought a log splitter with male 1/2 inch quick release couplings. My B7000 tractor does not have aux hydraulics fitted. I'm going to cut into the high pressure line, as shown in Dept Vic's video, and add two female quick release couplings. What do you do when the splitter is taken...

Hi All, I've got a real problem here and would appreciate some help. The 4WD/2WD selector on my B7000 is stuck real solid. I think the machine is stuck in 2WD and it is impossible to push the lever down to the 4WD position.I've tried with the machine stationary and moving, engine on and off...

Hi All, I want to be able to run a log-splitter / post hole borer etc from my B7000. I was given this recently and have absolutely no idea how to fix it to the tractor. It came off a B7100. Can anyone help me out here? What does the square box do? Where does the orange bracket attach to the...

I have traced a leak in the coolant system to the lower engine water pipe. Thought it was the Rad - but the rad is sound - good news! The machine is a B7000 - two cylinder, and the lower pipe needs removal, cleaning up and re-sealing. The water pipe contains a couple of notches in the end and...

My B7000 has a leaking radiator. Is it worth using Radweld or are we talking about a new rad here? Does anyone know where a new rad can be located in the UK? Thanks guys.

I've got oil coming out of the steering box wep hole. Can anyone throw any light on this? I've plugged the hole at the moment, but don't want problems down the line. Tractor is a B7000 Thanks

Hi Folks, Just realised that my previous post said PTO instead of ROPS......DOOH:rolleyes: So posting again... 'I have bought a B7000, obviously a grey model, but really clean with no oil leaks and no smoking. I contacted the local Kubota dealer to enquire about a ROPS, and was told the...

I need to adjust the cooling belt and have located the wing nut which adjusts the tensioning pulley. I have loosened the bolt with WD40 but still cannot turn it much. Is there a locking screw on this bolt? I don't want to apply too much force with pliers etc, as could shear of the bolt. Thanks...

I have bought a B7000, obviously a grey model, but really clean with no oil leaks and no smoking. I contacted the local Kubota dealer to enquire about a ROPS, and was told the model doesn't exist. I asked if ROPS for B6000 or B7100 would fit, but was told they couldn't supply it. I looked at...

Recently purchased a gray B7000 and discovered that some chump has managed to break off the grease nipple used to grease the clutch bearing. This nipple is in a difficult position, as the grease gun has to be inserted through a hole in the RHS tractor body. The thread of the nipple is still in...

Hi folks, I have recently purchased B7000 and want to replace the tyres. (Currently have padi-rice tyres fitted showing splits etc). A very stupid question: What size do I need for rear and front end tyres? Thanks Chris