Search results

Never called it that. But back in the 70's you would "run in the New brakes" on the stock cars. Was to polish off the brake fibers & match the shoe drum. Don't know if it made a differance but every body did it.

Not good pictures homemade landplane works great

There all over pricing on face book from $50 to &250 / Your 90 is fine just bevel the edges to get penatration. I beveled all of this including the fillet welds try to get 100% when ever posable.

Just a Hobart 190 Mig flux core

Changed every thing all safty switches , relays & ignition switch to no avail / Added a starter button / Problum solved / Tractor is working fine

Had a rear scup was not using $125 quick attach pl 3/8” & Time

Wright dates on filters / Also log in manual on a stapled in paper / also over grease so were good there

Thanks

Do you have to remove the solonled rod guid ??

ANSERED MY OWEN QUESTION /Rod out fuel off.

L3130 When the fuel solonid actuator rod is in the out or extended position is fuel "ON" or "OFF" to the injector pump ??? Thanks

L3130 can you install a fuel shut off cable to over ride fuel solenoid. / Having electrical problems. / Need to use tractor. / Have changed "ALL" switches , OPC timer , Starter Relay , ignition switch & the fuel shutoff solenoid.

No still shutting down fuel solonid clicking in & out

Put every thing back to OEM engine still no crank / jumped the starter tractor runs & operates as normal /turns on &off with switch. just will not crank with key switch. / starter relay ??

Thanks for the input & yes to all the above. Before this no cranking issue the fuel solenoid would shut the engine off with now one on it just sitting there idling. ( it is a new solenoid ) changed it when this first started FYI

wired the solenoid back to OEM have dash lights power to solenoid (it cilkes when ig is turned on / have power on all 3 poles out of ig switch when switch is in start position / there is only wire to starter it hase no power when ig is turned to start position / how do you jump these starters...

Hot wided the fuel solnoid started right up turned tractor off now will not even crankover HELP

Ok hot wired the solenoid works fine . Ignition switch . (Maybe) Wiring diagram power comes from ignition switch will get a new one & replace.

Changed the solenoid the orinal one was clicking on & off ( you could hear it ) The new one is doing the same thing " but not all the time used the tractor for a hr plus yesterday no Problum .Today used it 10 min. earlyer today no Problum went to use it agen "Problum" solenoid clicking on & off...