Search results

Thanks to all. The issue is that there is no voltage on the hold coil circuit, which means (naturally) that the solenoid is only energized by the pull circuit when cranking. I just put a switch to a relay on that circuit and used the mower for 2 hours without any hicups (i put a rely on the...

Thanks for the reply. I've got a few additional questions about this. On the solenoid, the "pigtail" has 3 wires, Red, Black, White. Obviously the Black is ground (verifed it with the connector on the tractor that plugs into the pigtail). Do you know which wire is the hold, and which wire...

I have an F3060 that only will run when the key is in the cranking position. Once the key is released, it stops. Occasionally, it will actually start and then continue running, only to die while mowing. I realize as a diesel engine, the only way to stop it is to shut off the fuel flow, so...