Search results

Sounds like bad/low battery or battery connections to me. Good Luck.

Heck....I'm waiting on somebody to answer the question. How low can one set the idle to on a Kubota ? Is it locked into the factory setting ? Can it be lowered from that ? If not....WHY NOT? thanks

I don't think it can be hurt by overfilling....in fact, think it could be running out the top and still not hurt anything....it's low you don't want !!!!!!!

I had mine overfull and it didn't hurt anything. Here's what I did. .....Put tractor on a slight incline with site glass on the upper side. Get a big clean bucket and funnel and reach down there and unscrew the siteglass.....it's plastic and easy to remove. Catch all the oil. While it's...

Rat poison and keep the hood open all the time when parked inside.

The spring clamps are the best. If it were me, I would keep them in place.....research it ...................

Thanks Wolfman. That's what I will do.

NO DT....it's a 2 WD ...and of course, no loader....about 600 hours. Thanks

Tractor hard to roll on flat cement. Can't shove at all to move a few feet. Acts like brakes are on. Brake linkage is loose, not engaging. Brakes work great. I have been running this tractor for a year or two and all is fine with it. No heat detected around brake area. Nothing warm. I went to...

I had one. Always some grinding when shifting. I think it's normal. Got a couple 2501's now and they do it also. I cuss them all the time, but it does not help !!! ha ha Adjusted clutches up one side and down the other.....nary a difference.. You can just sit there for awhile with the clutch in...

Could the jolt of the plywood falling have opened the hyd relief valve...and it hung open ???

Take it to the stick removal pro. It's gotta come out !

What are you running into ?

I dunno...never seen anything like it. Someone has tho....wait a bit....good luck

I heard something about a "rack" that gets hung up on those things....think they can be unstuck but am not sure about it...maybe look up stuck rack, etc on a search engine ???? Good Luck

I packed as much red grease into my cable sheath as I could. It ain't tore up yet...ha ha

Where is this lift pump you guys mentioned ? I have never seen one on a 2501. Thanks

The front wheels are free. I did jack up one rear wheel the other day. I could not turn it by hand. I am going to jack the rear up soon the get both rears off the ground to see what will happen (will need to chock up the front tilt first) . Involved in grass cutting rite now, so will wait until...

I bought this tractor used. I have put most of the 320 hours on it, tho. I have never seen a tractor act like this. I can barely shove the top of the rear tire on a flat cement floor. I had a New Holland that I could push all over that floor. Same HP tractor. Thanks guys

Have a 2016 L2501 2wd gear tractor. When mowing or moving even with heavy stuff attatched......pressing on the clutch gives a quick stop...almost like braking. The brakes have plenty of slack and are not dragging. I have checked each side and they brake as they should. On a flat cement surface...