Search results

Well still looking however have found the following; in/out 7/8 x 14 = #10 while working 9/16x18 = #6 One major design draw back is that all six valves are on the top of valve. That means one must remove working valves to remove either the in/out, no big deal but all the new units avoid that...

Good thing I checked back, never get email notification from here (look later) Using stock pump, 6 hoses; 4 working 2 feed/return, all 6 on top of valve. So the GPM is really low! thanks

Have a 1978 L185DT loader spool valve has seen better days. Would like to replace however a novice with the hydr stuff. So any suggestions on replacement? Kubota wants $650 for a Prince replacement, now that's a little high for me (unless that's really the going rate) Do not know any spec's on...

Newbie, so just do not know what things are called, so here is a try! In the front axle area behind the wheels there is a "bevel gear or swivel seal area" which is now leaking. (changed fluid and it now leaks too much) the area has a bolt on top and one below for fluid change. When draining it...