Cat 1 to 2 lift pin bushing spec and finding long lengths of tube??

[trackman23]

I am looking to buy a length of busing tube that I can cut into the exact lengths that I need to convert my cat 1 implants to cat 2 for my MX4800 lift arms. I have plenty of the standard length bushings but they are too short. I prefer not to stack two bushings so I am looking for a source of they busing tube where I could buy several feet.

any thoughts? Thx!

 

[TheOldHokie]

I am looking to buy a length of busing tube that I can cut into the exact lengths that I need to convert my cat 1 implants to cat 2 for my MX4800 lift arms. I have plenty of the standard length bushings but they are too short. I prefer not to stack two bushings so I am looking for a source of they busing tube where I could buy several feet.

any thoughts? Thx!

DOM Tubing - Drawn Over Mandrel Tubing

Details Discover premium Drawn Over Mandrel (DOM) tubing in our high-quality selection. DOM tubing is not a type but a process applied to tubing, enhancing precision and finish. The process involves being drawn over a mandrel, resulting in: More exact dimensions for inside and outside diameters...

www.stockcarsteel.com

 

[Botamon]

Our local farm supply store stocks those bushings in two different lengths. I have both lengths as I too have implements that take the longer ones.

 

[mikester]

https://www.amazon.com/Universal-Bushing-Category-Systems-Bushings/dp/B0G35QSPYY

Princess Auto

E-commerce webfront for Princess Auto

www.princessauto.com

 

[Killer Bee]

depending on the implement, something like this may come in handy. we have a few dual pinned implements, much more convenient to attach than fiddling with bushings. typically cat 1 facing in and cat 2 facing out. can also be accomplished with two pins each side if you have enough room.

Lift Arm Pin 7-3/4" 2" Category 1-2

 

[GreensvilleJay]

this....

1.125 OD x .125 Wall x .875 ID DOM Steel Tube - ASTM A513 Type 5

**** PLEASE READ **** If you need a custom cut length please make sure you buy a piece longer than or equal to the cut. Please note the scrape piece will not be shipped. Format for custom cut is in inches 0.000 " and standard cut tolerance is: + 1/8" -0". If you need a longer length please...

rivercityspecialtytubeco.com

might be the correct size ???

 

[trackman23]

Thx folks