Recent content by Zorm

didn't really think of the blue tooth "mickey mouse ears" thanks OM. Thing is, where I'm at, the temp and humidity, not sure how comfortable they would be. What I'm kind of looking for is if anyone has a mount they modified or made for this phone. My 2200 does not have a cab or any place flat...

folks, I think he dang thing is a leash, but wife gets up set when she leaves and I don't answer the phone, especially when I'm doing tractor work. Don't like keeping it in my pocket and I tried to put in the cup holder and it eventually bounces out. So, looking for pics of what others have...

Watched a video this weekend how a Kubota owner got a little more lofting power for his loader by adding a small shim kit to the hyd. control valve. Has anyone, or is there a kit like that for the BX2200 or LA211 loader? thanks

Alright folks, finally got my "little mule" running well this past Saturday. I was contemplating taking all the rear sheet metal off and remove the tank, then I found this Fuel tank access cover, well these are sold out, I ended up getting the cover with a pick up tube welded to the center...

Grandda4, I replaced the filter before the fuel pump under the running board, since I'm screwing with everything, may as well change the filter before the injector pump. This past Saturday, I did remove the little bit of fuel from the tank. Vice taking everything off to remove the tank, I...

Thanks folks, looks like I'm pulling the tank this weekend. As far as additives, what are you guys using? thanks

Thanks for all the good info gents. Actually had a bad fuel pump, replaced it and since I was there, replaced the filter between the tank and pump. After that, the filter was not really filling up as quickly as I thought it should. So traced the lines back to a plastic housing on the right...

Folks, got a 2003 BX2200. Bought the tractor used about 2 years ago. Has belly mower and LA211 front loader. I was working with it yesterday doing loader work, filling in and leveling two septic tanks. As I was smoothing out my last run for the day, I was backing up and all of a sudden, the...

thanks guys, Grandad4, I'm with you, the pto seems to be the hardest part. Maybe with more work, it will be easier. Bee-postive, I have a large pole barn with concrete floor, i'll remove it there. Need to figure out a storage location, maybe stand it on its side. Love this little 2200, its a...

I know how to remove and reattach, but looking to see if anyone has figured out an easier way. Like maybe driving up on ramps on the front. Or using the front loader, I have the LA211, to raise the front up, or what ever. Looking to see if anyone has a good quick procedure to remove and...

Alrighty, if anyone is paying attention, I got the cylinder removed, and taken apart. The seal kit I got from Kubota is 75596-43300, my cylinder is 75596-64011. I was able to get most seals off without too much trouble. I guess the dirt seal, the one exposed to the outside world in the head...

Thanks, dlsmith, any special tools? I was gonna do the lift cylinders myself but it required a special tool. Any issue with these seals off and on?

This is a 2003 BX2200. When I first got it did some ditch work with the loader, then one of the lift cylinder started leaking. I bought a seal kit for both cylinders and had a professional rebuild the cylinders. Now, after another day of work with the front loader, the bucket tilt cylinder is...

Replaced the steering cylinder and tie rod ends, after getting the air out, system working great!! thanks gents

thanks guys, got parts on order!