Zen's latest activity
-
ZZen reacted to TheOldHokie's post in the thread Brake, turn and running lights not working on one side of ROPS with
Like.
-
ZZen replied to the thread Brake, turn and running lights not working on one side of ROPS.Mystery solved. Removed the bracket at the top where the lights connect to the roll bar and found a connector that was disconnected...
-
ZZen replied to the thread Brake, turn and running lights not working on one side of ROPS.Thank you. Will do. Much appreciated.
-
ZZen replied to the thread Brake, turn and running lights not working on one side of ROPS.Thanks, yes, although I’ve been using a multimeter instead to check voltages and continuity.
-
ZZen replied to the thread Brake, turn and running lights not working on one side of ROPS.Thanks Dan. I found a 4 wire cable coming out the bottom of the ROPS. Each wire has an individual connector. After disconnecting them I...
-
ZZen reacted to Runs With Scissors's post in the thread Brake, turn and running lights not working on one side of ROPS with Like.
On my L2501, there is a connector for the turn signal directly under it, in the fender area. If you have a similar setup, just poke...
-
ZZen posted the thread Brake, turn and running lights not working on one side of ROPS in Service, Repair & Maintenance.Hi. All of the lights on one side of the rops on my stv36 have stopped working. The other side is fine. What can I test and check please?