Recent content by yardtoy1

i taped into the hydrolic distribution box rite next to the hydrolic filter. i came off the box with 3/8 steel pipe up to 1/2" T . i have to say had to move some hay yesterday ,when i curled the bucket back the 3 point came up on its own but still not rite. i disconected the loader but left the...

i have a L 3010 also trying a shaver post driver im going to try to dump the hydro fluid into the 1" fill hole in the back of the differential but im having 3 point problems have a post a few days earlyer

in response to one of the questions yes the 3 point is all the way down and won't lift ( I can lift it by hand easly ) I made sure the lines I added were clear and now have fluid in them but the 3 point still won't lift on its own. I have tried repeatly to raise and lower in small inncraments to...

I have a L3010 I changed the trans/ hydrolic oil and added2 lines to the rear of the tractor 1 pressure and 1 to the holding tank for a post driver, the tractor sat for a couple days with out hydro fluid, when I filled the reservoir the loader would work fine but not the 3 point. did I create a...