Recent content by yamiacaveman

So I did finally find a part number, boy these old eyes, lol. But still ifyou know of a way to use the Fig. No. please let me know. Thanks again All for your help!

Thanks so very much Russell! One more question though. With your help I have zeroed in on the part I need to get to and it does look like I have to take the steering wheel off to get to what i need. Sothe question, I have not found the part name in any of the diagrams I have looked at so far...

Thanks for the replies! What I'm looking for is how to remove that whole unit from the tractor, but this is probably the lead I need to follow to get to my issue of replacing the tach cable. Again thanks!!!!!!!!

Hi, I'm looking for a way to remove the dashboard to replace the tach cable on my Kubota. I found some video's on utube but as usual not for my model, I did find one to mouse proof the dash but he had already removed the dash. In that video he basically said to remove the steering wheel and the...

That's one reason I asked this questioned I didn't know if they were prelubed or even needed to be lubed. Thanks!

So Ijust bought a OEM ctach/hour cable for my Kubota. Looking for recomendations, before I need to install -- Do I need to lube? Should I lube? and if so what should I use to lube the cable? Thanks for any suggestions.

Thanks!!!!!!!!!!!! I'll see what I can find here in the U.S.A Again thanks for tht!!

I recently had the same issue with my 10 year old b3200. I changed everything and the next step was to pull my radiator out -- but I found about a 3 foot wand air attachment at probably harbor freight or some place like that -- It easily fit down the outside of the radiator, blew everything out...

So I'm not sure but the gauge for the rpm is not moving so I would belive I probably need a new tachometer/hour cable. Under What category would I find a part listing is it engine - transmission or??? I will admitt I am old and my eyes are not the greatest but boy I'm not seeing something like...

Yep that's it, I think I'll try squirting a little oil on it, might ok ast longer.

Update and solved. I ordered parts and started to figure out how I was going to attack the hst safety switch, when a much younger neighbor with good eyesight looked underneath and saw that the rod was not lining up with the safety switch. So the rod apparently popped out of the holder, he...

So I looked at the link you sent for parts - Messicks looking up there for B3200HSD (Hydrostatic Transmission, 4wd /Rops) Parts Electrical system - b10100 switch I see the 2 seat switches have the same part number - so are they the same but a different view right side up or down? and the Saftey...

Thanks for your help!

So the part I posted in the picture, it seemed to be connected to the hst pedal, is that like a gas strut of some sort to help keep it centered?