Recent content by Xplorer

Hello all. I have a B2150 that has slightly oversized tires that were installed by the previous owner. Current size is 24x8.50-12" front and 13.6x16 rears. All are turf tires and use chains on the front for snow removal. The fronts have been plugged several times and are very dry rotted. The 1...

Thanks to all for the correct info. Its running like new again.

Do I just open it and wait for fuel, or do I have to crank it till fuel comes out?

It's for my B2150. I was told that if I filled the fuel bowl when reassembling the fuel filter, that I wouldn't need to bleed the lines. The manual states that there are 2 valves the are opened and that bleeds the system after it's run out of fuel, but I only replaced the filter. It's really...

Thanks to statement made by kubman, I took a closer look to see if I could locate the ridge where the small o-ring would be located. Realized that the filter came apart when I removed it and the metal cap at the top of the of the filter was still on the housing. Thanks :-) Will I need to bleed...

I didn't see an o-ring on the old one.

I have the sequence correct, but the small o-ring (110) and the opening on the fuel filter (top of 100) are smaller than the filter housing opening. Do I force them on?

I took the bowl off and a mess of dirt. I purchased a new filter and 2 o-rings at the dealer to replace the filter. The big o-ring goes on the collar of the fuel bowl, but the small one and the filter opening (which I assume faces up) are too small. I did a cross reference and the filter number...